Abstract:Highly sulfonated carbon nano-onions (SP–CNOs) with large specific surface area are used as a new type of nanofiller in sulfonated poly(arylene ether sulfone) (SPAES) to construct and adjust the proton transfer channels efficiently. SP-CNOs are synthesized from nanometer diamonds via thermal annealing, phenylation and sulfonation, and characterized by XRD, XPS, BET, Raman and HRTEM. The obtained mesoporous SP-CNOs possess a large specific surface of 350 m2/g and an average pore size of 9.7 nm, which endow the nanoparticles with good dispersivity and hydrophilicity. A series of composite membranes based on SP-CNOs/SPAES are prepared through the solution casting approach and evaluated by FESEM, XRD, TGA, water uptake, proton conductivity, chemical stability and fuel cell performance. The results indicate that the composite membranes all show excellent mechanical toughness and greatly enhanced water-retention capacity, thermal, dimensional and oxidative stability due to the good interfacial compatibility and the formation of hydrogen-bond interaction between SP-CNOs and SPAES. The SPAES/SP-CNOs-1.5 membrane achieves the highest proton conductivity of 181.2 mS/cm at 90 °C, which is 45% higher than that of SPAES; H2/O2 fuel cell performance records a power density of 735 mW/cm2 at 80 °C, which is slightly better than that of Nafion® 112. In addition, the SPAES/SP-CNOs-1.5 membrane undergoes the CV decay of 0.38 mV/h after 168 h at 80 °C, which is comparable to Nafion® 112 (0.43 mV/h) but lower than that for the pristine SPAES membrane (0.54 mV/h). After the accelerated stress test, the SPAES/SP-CNOs-1.5 membrane exhibits superior cell performance and lower hydrogen crossover than the pristine SPAES membrane.

Sulfonated poly(2,6-dimethyl-1,4-phenylene oxide) (SPPO) electrolyte membranes reinforced by electrospun nanofiber porous substrates for fuel cells

Proton exchange composite membranes from blends of brominated and sulfonated poly(2,6-dimethyl-1,4-phenylene oxide)

Copolymerized sulfonated poly(oxindole biphenylene) polymer electrolyte for proton exchange membrane fuel cells

Achieving Better Balance on the Mechanical Stability and Conduction Performance of Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes Through Polydopamine/polyethyleneimine Co-Modified Poly(vinylidene Fluoride) Nanofiber As Support

Improved Performance of Sulfonated Poly Ether Ether Ketone/three-Dimensional Hierarchical Molybdenum Disulfide Nanoflower Composite Proton Exchange Membrane for Fuel Cells

SPEEK and SPPO Blended Membranes for Proton Exchange Membrane Fuel Cells

Sandwich Structure SPPO/BPPO Proton Exchange Membranes for Fuel Cells: Morphology–electrochemical Properties Relationship

Reinforced Polyphenylene Ionomer Membranes Exhibiting High Fuel Cell Performance and Mechanical Durability

Hybrid acid–base polymer membranes prepared for application in fuel cells

Novel sulfonated N-heterocyclic poly(aryl ether ketone ketone)s with pendant phenyl groups for proton exchange membrane performing enhanced oxidative stability and excellent fuel cell properties

Advanced proton exchange membrane prepared from N-heterocyclic poly(aryl ether ketone)s with pendant benzenesulfonic moieties and performing enhanced radical tolerance and fuel cell properties

Novel Nanocomposite PEM Membranes with Continuous Proton Transportation Channel and Reinforcing Network Formed by Electrospinning Solution Casting Method

A new nanocomposite membrane based on sulfonated polysulfone boron nitride for proton exchange membrane fuel cells: Its fabrication and characterization

Comb-shaped sulfonated poly(aryl ether sulfone) proton exchange membrane for fuel cell applications

Friedel-Crafts self-crosslinking of sulfonated poly(etheretherketone) composite proton exchange membrane doped with phosphotungstic acid and carbon-based nanomaterials for fuel cell applications

High-performance proton exchange membrane derived from N-heterocycle poly(aryl ether sulfone)s with ether-free hydrophilic blocks and exhibiting good stability and proton-conducting performance

Highly sulfonated carbon nano-onions as an excellent nanofiller for the fabrication of composite proton exchange membranes with enhanced water retention and durability

Novel bifunctional fillers (ATP/P–CNOs) for sulfonated poly(aryl ether sulfone) matrix for improved power output and durability of H2/O2 fuel cell at low humidity

Side chain sulfonic acid polymers with intrinsic pores in the main chain as proton exchange membranes for fuel cells and redox flow battery

Synthesis and Characterization of Poly(5'-hexyloxy-1',4-biphenyl)-b-poly(2',4'-bispropoxysulfonate-1',4-biphenyl) with High Ion Exchange Capacity for Proton Exchange Membrane Fuel Cell Applications

Double-filler composite sulfonated poly(aryl ether ketone) membranes with graphite carbon nitride and graphene oxide as polyelectrolyte for fuel cells