Abstract:Among alternative aromatic proton exchange membranes (PEMs) such as the perfluorosulfonic acid one, side-chain-type polymers have drawn great attention due to the formation of hydrophilic and hydrophobic domains and improvement in proton conductivity. In this work, we report the self-cross-linked sulfonated poly(ether ether ketone) with pendant sulfoalkoxy groups (SPEEK74-O-PAx) prepared by the reaction of hydroxy-functional SPEEK (SPEEK74-OH) with 1,3-propane sultone. The self-cross-linked networks are formed through the electrophilic aromatic substitution reaction catalyzed by protons from the grafted sulfopropyl groups without reducing the sulfonic acid groups. Higher tensile strength, lower water uptake, and in-plane swelling ratio but higher relative water retention than SPEEK74-OH are observed for SPEEK74-O-PAx. The proton conductivity of SPEEK74-O-PA100 is up to 0.1094 S cm–1 at 25 °C, and 0.2003 S cm–1 at 80 °C, which surpasses that of Nafion 212 at each temperature. The introduction of pendant flexible sulfoalkoxy side chains that are favorable for forming distinct steady hydrophilic and hydrophobic domains, and further confirmed by TEM images, can account for the high conductivity. Furthermore, SPEEK74-O-PA100 exhibits the highest power density of 1.358 W cm–2 at a current density of 3.0 A cm–2, which is superior to the performance of Nafion 212 (0.975 W cm–2) and at a high level for aromatic PEMs. The combination of a facile fabrication procedure and remarkable single cell performance enables SPEEK74-O-PAx to be promising membranes for PEM fuel cells.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00022?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00022</a>.1H NMR spectra of SPEEK74, SPEEK74-O-PA50, and SPEEK74-O-PA75; photographs of solubility test, relative water retention of PEMs; arrhenius plot of proton conductivity; SEM images of the surface of SPEEK74-OH and SPEEK74-O-PAx; single cell performance for H2/air PEMFCs; and summary of OCVs for various PEMs (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00022/suppl_file/ae1c00022_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Side chain sulfonic acid polymers with intrinsic pores in the main chain as proton exchange membranes for fuel cells and redox flow battery

Sulfonated Polyaryletherketone with Pendant Benzimidazole Groups for Proton Exchange Membranes

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Polybenzimidazole/ionic-liquid-functional Silica Composite Membranes with Improved Proton Conductivity for High Temperature Proton Exchange Membrane Fuel Cells

Novel Cross-Linked Membranes Based on Polybenzimidazole and Polymeric Ionic Liquid with Improved Proton Conductivity for HT-PEMFC Applications

Composite Membranes Based on Polybenzimidazole and Ionic Liquid Functional Si–O–Si Network for HT-PEMFC Applications

Achieving Better Balance on the Mechanical Stability and Conduction Performance of Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes Through Polydopamine/polyethyleneimine Co-Modified Poly(vinylidene Fluoride) Nanofiber As Support

High conductive and dimensional stability proton exchange membranes with an all-carbon main chain and densely sulfonated structure

Branched Sulfonimide-Based Proton Exchange Polymer Membranes from Poly(Phenylenebenzopheneone)s for Fuel Cell Applications

Preparation of proton exchange membrane with intrinsic micropores constructing efficient ion transport channels based on segmented copolymer (sulfonated polyimide)

High-performance proton exchange membrane derived from N-heterocycle poly(aryl ether sulfone)s with ether-free hydrophilic blocks and exhibiting good stability and proton-conducting performance

Sulfonated Microporous Polymer Membranes with Fast and Selective Ion Transport for Electrochemical Energy Conversion and Storage

Comb-shaped sulfonated poly(aryl ether sulfone) proton exchange membrane for fuel cell applications

Adjusting structure-activity relationship to obtain hybrid proton exchange membrane with enhanced transport efficiency by introducing functionalized nano-coated MOFs

High Conductive Anion Exchange Membranes from All-Carbon Twisted Intrinsic Microporous Polymers

Zwitterion-functionalized nanofiber-based composite proton exchange membranes with superior ionic conductivity and chemical stability for direct methanol fuel cells

Reinforced Polyphenylene Ionomer Membranes Exhibiting High Fuel Cell Performance and Mechanical Durability

Spacer-engineering construction of continuous proton transport networks for cardo poly(biphenyl indole) high-temperature proton exchange membranes

Preparation and study on H–MoS 2 /SLS modified SPI@SPEEK blend proton exchange membrane with balanced proton conductivity and stability

Self-Cross-Linked Sulfonated Poly(ether ether ketone) with Pendant Sulfoalkoxy Groups for Proton Exchange Membrane Fuel Cells

Sandwich-structure PI/SPEEK/PI proton exchange membrane developed for achieving the high durability on excellent proton conductivity and stability