Abstract:Little detailed information is available on the microwave drying characteristics of potato and the use of different microwave powers to dry food products. Experiments were conducted to study the microwave drying characteristics and the dried quality of potato. The study focuses on describing the microwave drying characteristics of potato and discussing the effect of sample thickness, drying power and mass. The results show that if the power level increases, the mass load decreases and the thickness of the sample decreases, the dehydration rate increases and the drying energy consumption decreases. There are two falling rate periods during microwave drying of potato: the first falling rate period is for a moisture content of more then 1.1 (dry basis, DB); the second falling rate period is for a moisture content of less than 1.1 (DB). The same water loss will consume more energy when the moisture content is less than 1.1 (DB). A two-stage drying process was employed during microwave drying of potato. The microwave power of the first drying stage differed form that of the second drying stage. The moisture content of the breakpoint for the conversion of the first drying stage into the second drying stage is a moisture content of 1.1 (DB). A quadratic orthogonal regression experiment was conducted, and the effects of slice thickness, the first drying load power and the second drying load power on sensory quality, the rehydration ratio and the energy consumption rate were established. The slice thickness, the first drying load power and the second drying load power linearly affected the three indices. The effect of the product of the second drying load power and the potato slice thickness on the rehydration ratio and the energy consumption rate is significant. The optimum drying parameter combination for the three indices was obtained. The rehydration ratio of the dried products decreased with an increase of the second drying load power and the slice thickness. The concave curves of the sensory quality versus the three factors were shown.

Coupled hot air and microwave drying technology for carrot slices dehydration

Drying characteristics and drying quality of carrot using a two-stage microwave process

The influence of γ-irradiation and the better technology on the drying for apple slice

Optimization of the microwave drying processing condition of carrot slices

Effect of Microwave-Vacuum Drying on the Carotenoids Retention of Carrot Slices and Chlorophyll Retention of Chinese Chive Leaves

Influence of three stage ultrasound—intermittent microwave—hot air drying of carrot on physical properties and energy consumption

Study on Coupled Hot Air and Microwave Drying of Fresh Jujube

Aroma and Quality of Carrot Dried Using a Microwave-Convective Drying System As Affect by Temperature Gradient

Microwave Drying Characteristics of Potato and the Effect of Different Microwave Powers on the Dried Quality of Potato

Microwave-Vacuum Drying of Carrot under Various Power Modes

Study on drying efficiency, uniformity, and physicochemical characteristics of carrot by tunnel microwave drying combined with explosion puffing drying

Influence of γ-irradiation on Drying of Potato Slices

Effects of Layer Arrangement on Heating Uniformity and Product Quality after Hot Air Assisted Radio Frequency Drying of Carrot

The Research Process of Microwave Fluidization Combined Drying Technology in Fruit and Vegetables

Application of vacuum-cooling pretreatment to microwave freeze drying of carrot slices

Investigation of Hot Air–Assisted Radio Frequency As a Final-Stage Drying of Pre-dried Carrot Cubes

Research on combined heat pump with microwave drying

Hybrid microwave-hot air drying of the osmotically treated carrots

Analysis of thermal effect using Coupled Hot-air and Microwave heating at different position of potato

The Drying Characteristics and Technology of Potato Slices by Microwave

A Novel Dehydration Technique for Carrot Slices Implementing Ultrasound and Vacuum Drying Methods