Abstract:Purpose Numerically analyzed the flow characteristic and explored the hydrodynamic mechanism of the S-shaped region formation of a Francis pump-turbine. Design/methodology/approach Three-dimensional steady and unsteady simulations were performed for a number of operating conditions at the optimal guide vanes opening. The steady Reynolds averaged Navier-Stokes equations with the SST turbulence model were solved to model the internal flow within the entire flow passage. The predicted discharge-speed curve agrees well with the model test at generating mode. This paper compared the hydrodynamic characteristics of for off-design cases in S-shaped region with the optimal operating case, and more analysis focuses particularly on very low positive and negative discharge cases with the same unit speed. Findings At runaway case towards smaller discharge, the relative circumferential velocity becomes stronger in the vaneless, which generates the “water ring” and blocks the flow between guide vane and runner. The runner inlet attack angle becomes larger, and the runner blade passages nearly filled with flow separation and vortexes. The deterioration of runner blade flow leads to the dramatic decrease of runner torque, which tends to reduce the runner rotation speed. In this situation, the internal flow can’t maintain the larger rotating speed at very low positive discharge cases, so the unit discharge-speed curves bend to S-shaped near runaway case. Originality/value The analysis method of four off-design cases on S-shaped region with the comparison of optimal operation case and the calculated attack angles are adopted to explore the mechanism of S characteristic. The flow characteristic and quantitative analysis all explain the bending of the unit discharge-speed curves.

Flow of Pump-turbine on S-shaped Region of Complete Characteristics

Distribution Features of Flow Patterns and Pressure Pulsations of Pump-Turbine in Five Operating Modes on the Four-Quadrant Plane

Pressure pulsation analysis of runner and draft tube of pump turbine under different working conditions

Analysis of the Internal Flow Behavior on S-shaped Region of a Francis Pump Turbine on Turbine Mode

Investigate the full characteristic of a centrifugal pump-as-turbine (PAT) in turbine and reverse pump modes

Unsteady Flow Analysis of Pump Mode Small Discharge Condition for a Francis Pump-turbine

S-shaped characteristics of pump turbine with large guide vane opening by experimental and numerical analysis

Numerical simulation of the pump-turbine s characteristic

Investigation into the Flow Details of Runner Region in A Pump Turbine at Off-Design Conditions

Study on the Unsteady Flow Characteristics of a Pump Turbine in Pump Mode

Analyzing the S-characteristic of pump-turbine under the same head condition from the perspective of flow energy dissipation

Entropy Production Analysis for S-Characteristics of a Pump Turbine

Unstable Flow Characteristics in a Pump-Turbine Simulated by a Modified Partially-Averaged Navier-Stokes Method

Analysis of the Pump-Turbine S Characteristics Using the Detached Eddy Simulation Method

Numerical analysis on flow in pump-turbine in turbine mode at high flow rates

Analysis of S Characteristics and Pressure Pulsations in a Pump-Turbine With Misaligned Guide Vanes

Numerical Investigation on the “S” Characteristics of a Reduced Pump Turbine Model

Numerical Simulation Of The Unsteady Flow In A High-Head Pump Turbine And The Runner Improvement

Unsteady Simulation and Analysis for Hump Characteristics of a Pump Turbine Model

Unstable head-flow characteristics of pump-turbine under different guide vane openings in pump mode

Vortex motion in vaneless space and runner passage of pump-turbine in S-shaped region