Abstract:Efforts were made to explore the potentiality that formic acid gives a conversion into methanol by applying metallic catalysts in subcritical hydrothermal conditions. The subcritical hydrothermal conversion of formic acid into methanol was carried out by using Zn as a reductant and Ni as a catalyst. The effect of various experimental parameters, e.g., the amount of Zn (Ni), Zn/Ni ratio, temperature, pressure, reaction time and filling rate etc. was investigated. The conclusion showed that the highest methanol yield of 11.95% was achieved under proper conditions which was certified in the experiment that Zn/Ni ratio of 1:1.3, temperature of 180, reaction time of 12 hours, filling rate of 35%. Nickel, as one of transition metals, was effective catalyst in the hydrothermal conversion of formic acid into methanol. The reaction time was extended unavoidably with relatively low temperature. It can be expected that reaction time could have farther reduction with the increase of temperature. Additionally, the hydrothermal reaction can also occur without the addition of reductant and catalysts. According to the analysis of GC-TCD(thermal conductivity detector), H2 and CO2 were detected. It was supposed that formic acid gave a quick decomposition into H2 and CO2 initially and then the reaction of methanol synthesis occurred and the reaction of H2 and CO2 was proved existing through the observation of changes of H2 and CO2 amount. However, methanol can also be obtained through reducing formic acid with H2 as reductant. Based on present experimental analysis, it can be determined that the former reaction path has its priority. It is not sure that whether formic acid was directly reduced into methanol by H2..

Transfer Hydrogenation Reaction of Ketones and Formic Acid under Hydrothermal Conditions Without A Catalyst

Hydrogen Transfer Reduction of Ketones Using Formic Acid As a Hydrogen Donor under Hydrothermal Conditions

Hydrogen-Transfer Reduction of Ketones into Corresponding Alcohols Using Formic Acid As a Hydrogen Donor Without a Metal Catalyst in High-Temperature Water

Catalytic in Situ Hydrogenation of Fatty Acids into Fatty Alcohols over Cu-Based Catalysts with Methanol in Hydrothermal Media

Recent Advances in Catalytic Transfer Hydrogenation with Formic Acid over Heterogeneous Transition Metal Catalysts

Water-improved Heterogeneous Transfer Hydrogenation Using Methanol As Hydrogen Donor over Pd-based Catalyst

Application of Alkoxide in Catalytic Transfer Hydrogenation of Unsaturated Nitrogen Compounds

Catalytic Transfer Hydrogenation of Aryl Sulfo Compounds

From NaHCO3 into formate and from isopropanol into acetone: Hydrogen-transfer reduction of NaHCO3 with isopropanol in high-temperature water

Study of Catalytic Reduction of Formic Acid to Methanol under Mild Hydrothermal Conditions

Catalytic Conversion of Formic Acid into Methanol in Subcritical Hydrothermal Conditions

Catalytic conversion of formic acid to methanol with Cu and Al under hydrothermal conditions

Mechanistic Insights into Hydrodeoxygenation of Acetone over Mo/HZSM-5 Bifunctional Catalyst for the Production of Hydrocarbons

The Alcohol-Mediated Reduction of CO2and NaHCO3into Formate: a Hydrogen Transfer Reduction of NaHCO3with Glycerine under Alkaline Hydrothermal Conditions

Optimization Study on Catalytic Reduction of CO2 into Formic Acid Under Hydrothermal Conditions

Methanol Production by Reduction of Formic Acid over Cu Catalyst under Hydrothermal Conditions

Catalytic Conversion of NaHCO3 into Formic Acid in Mild Hydrothermal Conditions for CO2 Utilization

Varying the Ratio of Formic Acid to Triethylamine Impacts on Asymmetric Transfer Hydrogenation of Ketones

Hydrazine As a New and Facile Hydrogen Source for Hydrothermal Reduction of CO2to Formic Acid

Catalytic Transfer Hydrogenation with Methanol over Pt/C Catalyst for Synergistic Hydrothermal Hydrogenation of Palmitic Acid

Hydrazine As a Facile and Highly Efficient Hydrogen Source for Reduction of NaHCO3 into Formic Acid over Ni and ZnO Catalysts