Abstract:The fringing fields of magnets with large apertures and short lengths greatly affect ion-optical calculations. In particular, for a high magnetic field where the iron core becomes saturated, the effective lengths and shapes of the field distribution must be considered because they change with the excitation current. Precise measurement of the three-dimensional magnetic fields and the correct application of parameters in the ion-optical calculations are necessary. First we present a practical numerical method of extracting full 3D magnetic field maps of magnetic multipoles from 2D field measurements of the surface of a cylinder. Using this novel method we extracted the distributions along the beam axis for the coefficient of the first-order quadrupole component, which is the leading term of the quadrupole components in the multipole expansion of magnetic fields and proportional to the distance from the axis. Higher order components of the 3D magnetic field can be extracted from the leading term via recursion relations. The measurements were done for many excitation current values for the large-aperture superconducting triplet quadrupole magnets (STQs) in the BigRIPS fragment separator at the RIKEN Nishina Center RI Beam Factory. These distributions were parameterized using the Enge functions to fit the fringe field shapes at all excitation current values, so that unmeasured values are interpolated. The extracted distributions depend only on the position along the beam axis, and thus the measured three-dimensional field can easily be parameterized for ion-optical calculations. We implemented these parameters in the ion-optical calculation code COSY INFINITY and realized a first-order calculation that incorporates the effect of large and varying fringe fields more accurately. We applied the calculation to determine the excitation current settings of the STQs...

Measurement of the magnet blocks for SSRF insertion devices

Single-block measurement for the cryogenic permanent magnet undulator sorting

The Online Undulator Magnetic Field Measurement System

A highly automatic measurement system for three orthogonal magnetic moments of a permanent magnet block

A novel device for the measurement of the mechanical and magnetic axes of superconducting magnet assemblies for accelerators

Pulsed wire magnetic-field measurement system on permanent magnet quadrupoles

Design and Test of A Short Mockup Magnet for the Superconducting Undulator at the Ssrf

Study on the magnetic measurement results of the injection system for CSNS/RCS

Differential method for measuring periodic magnetic structure

Magnetic Measurements of HL-LHC AUP Cryo-Assemblies at Fermilab

Preliminary Study On Measurement Of Magnetic Center Of Quadrupoles Using Quadrupole Shunt For Hefei Storage Ring

RF and Field Measurements of the SSC-LINAC RFQ

Design, construction, and magnetic field characterization of a Segmented Adaptive-Gap In-Vacuum Undulator prototype for NSLS-II

Design and Measurements of SFRFQ Cavity

Design and Measurement of Dipole Magnets for CSNS 1.6GeV RCS

A NEW HELMHOLTZ COIL PERMANENT MAGNET MEASUREMENT SYSTEM

A Magnetic Susceptibility Measurement System Based on a Single-Axis Atomic Magnetometer

The Design and Application of Magnetic Landmark used for Magnetic Fiducialization of HEPS Insertion Devices

Research on Magnetic Properties of Nd(Pr)FeB Magnet for Cryogenic Permanent-Magnet Undulator of SSRF

Development of a Real-Time Magnetic Field Measurement System for Synchrotron Control

Extraction of 3D field maps of magnetic multipoles from 2D surface measurements with applications to the optics calculations of the large-acceptance superconducting fragment separator BigRIPS