Abstract:Dynamics modeling and stress response solution of the liquid-filled pipe system (LFPS) are necessary to predict the reliability of the pipe. However, the existing methods still need further research to solve the stress response of pipe system, and the influence of fluid velocity and pressure (FVAP) fluctuations on the vibration response is not considered. Based on this, a dynamics modeling method named FEM-TMM is proposed to solve the natural characteristics and stress response of the LFPS based on the combination of the finite element method (FEM) and transfer matrix method (TMM), which can consider the fluctuations of FVAP. The incompatible solid (Solid-NC) and virtual beam (VBeam) elements are constructed to establish the finite element models of the solid and fluid domains respectively, and the coupling elements are introduced to couple the solid and fluid domains. TMM is used to solve the FVAP fluctuations of the LFPS under external excitation, and the steady-state resonant frequency and vibration mode are obtained based on the iteration method. The virtual force iteration and stress smoothing methods are adopted to solve the stress response of the LFPS, then the dynamics modeling method FEM-TMM is obtained, and the rationality of the modeling method is verified by experiments. Finally, the analysis results show that the influence of velocity fluctuation on resonance frequency and stress response can be ignored. The critical pressures of resonant frequencies are less than or equal to those of resonant frequencies without considering pressure fluctuation. There are multiple stress barriers and valleys in the different-order stress responses of the LFPS, and the pressure fluctuation will change the distribution laws and maximum peak values of the stress barriers.

Numerical Simmlation for Dynamic Response of a T-shape Pipe and Fluid Inside

Numerical Simulation of Serial Sudden Expansions Pipe Flow

Three-dimensional Simulation of Hydraulic Transient and Dynamic Stress Analysis of Pipe in Consideration of Fluid-Structure Interaction

A Numerical Study on the High-Velocity Impact Behavior of Pressure Pipes

Pipe Deformation and Dynamic Stress Analysis During Water Hammer

Semi-analytical Solution for Dynamic Behavior of a Fluid-Conveying Pipe with Different Boundary Conditions

Simulation and experimental verification on fluid-structure interaction of T-shaped pressure pipeline

Three-dimensional computational fluid dynamics simulation of valve-induced water hammer

Analytical Solution for Fluid-Structure Interaction in Liquid-Filled Pipes Subjected to Impact-Induced Water Hammer

Coupling Analysis Of Fluid-Structure Interaction In Fluid-Filled Elbow Pipe

APPLICATION OF HYBRID MODELING METHOD TO SIMULATE WATER HAMMER IMPACTS IN ULTRA-LARGE WATER CONVEYANCE TUNNEL

Numerical Simulation of Fluid-Structure Interaction with Water Hammer in a Vertical Penstock Subjected to High Water Head

Numerical Simulation To The Effect Of Air In Dam-Break Problem

Numerical Simulation of Cavities Collapsing Water Hammer of Pipelines Under Complicated Topography in Sweeping Water Process

Dynamics modeling and stress response solution for liquid-filled pipe system considering both fluid velocity and pressure fluctuations

A Simulation Calculation Method of a Water Hammer with Multpoint Collapsing

Numerical Simulation of Water Hammer in Shutting Liquid Rocket Engine

A study of the numerical simulation of water hammer with column separation and cavity collapse in pipelines

Numerical Simulation for Two-Phase Water Hammer Flows in Pipe by Quasi-Two-Dimensional Model

Numerical study on the dynamic response of liquid-filled closed hollow cylinder under water impact

Dynamic Response of Pressurized Gas Pipes Subjected to Transverse Impact Loads