Abstract:We present an all-fiber, fully open Fabry-Perot interferometer (FPI) cavity that is suitable for fluidic measurement applications. Fabrication of the FPI involves the alignment and bonding of three optical fiber sections using either ceramic glue or low-temperature melting glass. The fabrication procedure allows the protection of the cleaved optical fiber end faces, which serve as the two mirrors of the FPI, from damage, thus ensuring the high visibility of the FPI sensor. The FPI's complete openness permits the analyte of interest fluids to flow smoothly into the cavity and interact directly with the light, obviating the need for additional assistance. The fabrication experiment demonstrates that the fabrication procedure can readily achieve a visibility of over 20 dB. Refractive index testing indicates that the sensor exhibits a sensitivity of over 1116 nm/RIU within the range of 1.334-1.375. A comparison of temperature investigations indicates that the fully open cavity FPI fabricated by bonding with low-temperature melting glass exhibits relatively lower temperature immunity than that bonded with ceramic glue. Both have a relatively low temperature fluctuation within the temperature range of 40°C-100°C, with less than 3 nm and 4.5 nm in the over 60°C changes, respectively. Our proposed fully open FPI is an economical, robust, and simple-to-fabricate structure with the potential for mass production. This renders it an appealing option for practical optofluidics applications.

Extrinsic Fiber-Optic Fabry-Perot Interferometer Sensor for Refractive Index Measurement of Optical Glass.

Measurement of the Group Refractive Index of Bulk Material Using White-Light Spectral Interferometry

Sensitivity-enhanced Optical Sensor Based on Multilayer Coated Fabry–Pérot Interferometer

Ultra compact and sensitive optical fiber interferometric refractive index sensor

Fiber Optic Sensor for Simultaneous Measurement of Refractive Index and Temperature Based on Internal-and- External-Cavity Fabry–Pérot Interferometer Configuration

Refractive Index Sensing Characteristic of A Hybrid-Fabry-Perot Interferometer Based on an In-Fiber Ellipsoidal Cavity

Highly sensitive refractive index sensor with fiber in-line Fabry-Perot interferometers based on vernier effect

Refractive Index Sensor Based on Tilted Fiber Bragg Grating and Stimulated Brillouin Scattering.

Simultaneous Measurement of Refractive Index and Temperature Using a Mach-Zehnder Interferometer with Forward Core-Cladding-core Recoupling

Refractive Index Sensor Using Microfiber-Based Mach-Zehnder Interferometer

Fabry–Perot interferometer fiber tip sensor based on a glass microsphere glued at the etched end of multimode fiber

Refractive Index Sensor Based on No-Core Fiber With Optoelectronic Oscillator Interrogation

Inline fiber interference-based refractive-index sensor

A Sensing Peak Identification Method for Fiber Extrinsic Fabry–Perot Interferometric Refractive Index Sensing

Investigation of A Cladding-Etched Thin-Core Fiber Modal Interferometer and Its Application for Refractive Index Sensing

Ultrasensitive and Wide-Measuring-Range Refractive Index Sensor with Optical Path Length-Tunable Vernier Effect

Refractive Index Sensor Based on Double Side-Polished U-Shaped Plastic Optical Fiber

All-Fiber Fabry-Perot Interferometer Gas Refractive Index Sensor Based on Hole-Assisted One-Core Fiber and Vernier Effect

All In-Fiber Fabry–Pérot Interferometer Sensor Towards Refractive Index and Temperature Simultaneous Sensing

Femtosecond laser-inscribed fiber interface Mach–Zehnder interferometer for temperature-insensitive refractive index measurement

In-line fiber optic optofluidic sensor based on a fully open Fabry-Perot interferometer