Abstract:This paper primarily investigates the effect of the tilt of corner cube reflector (CCR) arrays on lunar laser ranging (LLR). A mathematical model was established to study the random errors caused by the tilt of the CCR arrays. The study found that, ideally, when the laser ranging pulse width is 10 picoseconds or less, it is possible to distinguish from which specific corner cubes within the CCR array each peak in the echo signal originates. Consequently, partial data from the echo can be extracted for signal processing, significantly reducing random errors and improving the single-shot precision of LLR. The distance obtained by extracting part of the echo can be reduced to the center position of the array, thereby providing multiple higher-precision ranging results from each measurement. This not only improves the precision of LLR but also increases the data volume. A simulation experiment based on the 1.2 m laser ranging system at Yunnan Observatories was conducted. By extracting one peak for signal processing, the single-shot precision improved from 32.24 mm to 2.52 mm, validating the theoretical analysis results. Finally, an experimental laser ranging system based on a 53 cm binocular telescope system was established for ground experiments. The experimental results indicated that the echo signal could identify the tilt state of the CCR array. By extracting the peak returned by the central CCR for signal processing, the ranging precision was greatly improved. Through theoretical analyses, simulation experiments, and ground experiments, a solution to reduce the random errors caused by the tilt of the CCR array was provided. This offers an approach to enhance the single-shot precision of future LLR and provides a reference for upgrading ground-based equipment at future laser ranging stations.

Analysis and fabrication of corner cube array based on laser direct writing technology.

Analyzing characteristic of the cube-corner retroreflector applied to laser straightness measurement

Analysis of Reflection Property of Cube-corner Retroreflector with Vector Expression

Research on Far-Field Diffraction of Cube-Corner Retroreflector in the Satellite Laser Ranging System

Calculation On Diffraction Aperture Of Cube Corner Retroreflector

Far-field diffraction pattern of a nonideal retroreflector for polarized light with an oblique incidence.

Adjustment on the Received Optical Power of a Ground-Based Optical Instrument by a Corner Cube Retroreflector with a Curved Front-Face.

Coupled cavity-waveguide based on topological corner state and edge state

Output Properties of a cube corner arrays resonator

Measuring Corner Cube Reflectors Through Ray Tracing Of A Reflected Wavefront

Analysis and experimental verification of the polarization characteristics of cube-corner reflectors

Calculation of the light intensity distribution reflected by a planar corner-cube retroreflector array with the size of centimeter and above

Calculation of the Light Intensity Distribution Reflected by a Spherical Cube Corner Retroreflector Array

Analysis of the Effect of Tilted Corner Cube Reflector Arrays on Lunar Laser Ranging

On-chip Wavefront Shaping in Spacing-Varied Waveguide Arrays

Corner Cube Recognized As Super-Conjugator

Experimental research on a multi-aperture phase modulation technique based on a corner-cube reflector array

Research on 2 Μm Polarization Maintaining Laser Cavity Based on the Depolarization Characteristics of a Corner Cube Prism

Focusing Ability Enhancement in Broadside Direction of Array: From UCA to UCCA

Image Acquisition and Processing of a Laser Warning System Based on Planar Array CCD