Abstract:To address the drawbacks of inadequate energy density as well as utilization effectiveness in solar energy utilization, phase change energy storage offers a possible option. However, the low thermal conductivity of traditional phase change materials (PCMs) restricts the extent to which solar energy utilization can be enhanced. In this paper, the impact of the metal foam (MF) on the solid–liquid interface, the flow field, the enhancement heat transfer mechanism during the paraffin wax (PX) melting process and thermal storage characteristics was analyzed. Besides, a three-dimensional mathematical model of MF-PX using the hybrid mesh technique was established and software ANSYS-FLUENT was used for simulation. The results indicated that, the hybrid mesh exhibited a reduction of 52.75 % in mesh count compared to the unstructured mesh, resulting in 45 % reduction in computational time. Moreover, the hybrid mesh also showcased improved mesh quality that the unstructured mesh was mainly distributed in the range of 0.48–0.6, while within the range of 0.84–1.0 for the hybrid mesh. More important, the maximum relative error between experimental and simulation was 8.67 %, indicating that the model can make a reasonable prediction. With the proportions of MF increased from 0.11 % to 0.43 %, both the Rayleigh number (Ra) and its amplification decreased. At 800 s, the Ra decreased from 1.76E+07 to 1.20E+07, while the amplification of the Ra was reduced from 1.88E+07 to 1.30E+07. In addition, the natural convection proportions of CMF decreased from 96.31 % to 80.65 %. These observations indicated that natural convection was the primary heat transfer mechanism, and the conduction was enhanced by the increasing proportion of MF. Finally, in terms of heat storage characteristics, the heat storage capacity and heat storage rate of the composite PCM slightly decreased. The heat storage values decreased from 19.30 kJ to 18.66 kJ. Similarly, the heat storage rates decreased from 19.86 J/s to 18.81 J/s.

Numerical Simulation of the Heat Storage Process of a Waste Heat Utilization-oriented Phase-change Paraffin

Numerical Simulation of the Effect of Heat Conductive Fillers on the Heat Conduction Behavior of a Paraffin Phase Change Energy Storage System

STUDY ON CHARGING AND DISCHARGING RATES OF LATENT HEAT THERMAL ENERGY STORAGE SYSTEMS EMPLOYING MULTIPLE PHASE CHANGE MATERIALS

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Heat transfer performance of a phase-change material in a rectangular shell-tube energy storage tank

Comprehensive Study on Melting Process of Phase Change Material by Using Paraffin Coupled Finned Heating Plate for Heat Transfer Enhancement

Comparative analysis and research on heat transfer enhancement of fin tube-paraffin

Numerical Simulation of Fin-tube Heat Pump with Phase Change Thermal Storage

Numerical study on the melting performance of PCM by fractal fins in three-tube heat storage system

Numerical Simulation On Melting And Solidification Of A Phase-Change Material In An Aluminum Plate-Fin Thermal Storage

Numerical Simulation of Thermal Performance and Thermal Stress of Latent Heat Storage System with Various Fins

Application of performance dynamic equationin numerical simulation and optimization of waste heat utilization and storage system

Numerical Analysis of Melting Process in a Rectangular Enclosure with Different Fin Locations

Effect of fin number on the melting phase change in a horizontal finned shell-and-tube thermal energy storage unit

A New Model of Phase Change Process for Thermal Energy Storage

Heat Storage Performance of PCM in a Novel Vertical Pointer-Shaped Finned Latent Heat Tank

Numerical investigation of melting enhancement for paraffin in an innovative finned-plate latent heat thermal energy storage unit

Numerical and optimization study on heat storage and release process of novel fin-metal foam composite structures under periodic heat source

Numerical study of heat transfer characteristics of phase change materials reinforced with porous media based on hybrid mesh

NUMERICAL SIMULATION OF PHASE CHANGE HEAT TRANSFER IN HIGH TEMPERATURE FIN-PLATE THERMAL STORAGE

Simulation and Experimental Investigation of the Effect of Pore Shape on Heat Transfer Behavior of Phase Change Materials in Porous Metal Structures