Abstract:Structures’ ultimate strength has been increasingly valued in the past few decades. The model test is an important and reliable way to estimate the ultimate strength. For large and complex structures, like ship hull structures, the test subject is usually scale models due to the limitation of loading capacity and space of laboratories. Therefore, the similarity method and the design of scale models are of great importance. The stiffened plate is the minimum unit that makes up thin-walled structures. The similarity method of the ultimate strength of stiffened plates is the base of the similarity method of large and complex structures. This paper is a further study of an existing similarity method proposed in our previous work. A stiffened plate from a real ship is taken as the subject. 22 combinations of scale ratios are used to design scale models. The 23 models (including the original model) are subjected to a combined load of longitudinal compression and lateral pressure. The non-linear finite element method is used to analyze these models. The results revealed that the previous method is only suitable for scale models with small degrees of geometrical distortion. It didn't consider the effect of geometrical distortions. An improved similarity method and scale model design method are proposed to solve these problems. The improved methods consider the geometrical distortion of scale models and are applicable to more geometrically distorted scale models. More numerical examples are performed to verify the correctness and advantage of the improved methods.

Analysis of the Similar Model for Ultimate Strength Subjected to Combined Action of Bending and Torsion of a Container Ship

Design similar scale model of a 10,000 TEU container ship through combined ultimate longitudinal bending and torsion analysis

Study on the Similar Model of Small Scale for Hull Ultimate Strength Experiment

Key Influencing Factors in Ultimate Strength Analysis for Large Container Ships

Ultimate Strength Model Experiment Regarding A Container Ship'S Hull Structures

An Improved Similarity Method for Stiffened Plates Subjected to Combined Loads of Longitudinal Compression and Lateral Pressure

Ultimate Strength of Typical Stiffened Panels in Container Ships with Comparison of Hull Girder Bending Analysis

Ultimate strength envelope of a 10,000teu container ship's global hull girder subjected to combined vertical bending, horizontal bending and torsion

Numerical Investigation of Three-Dimensional Hull Girder Ultimate Strength Envelope for an Ultra Large Container Ship

Ultimate strength envelope of a 10,000TEU large container ship subjected to combined loads: From compartment model to global hull girder

Experimental and Numerical Investigations of the Ultimate Torsional Strength of an Ultra Large Container Ship

Ultimate Strength of Container Ship Bilge Panels Subjected to Axial Compression Combined with Bending and Lateral Pressure

Investigation of Container Ship Structural Dynamic Ultimate Strength Under Combined Bending, Torsion and Lateral Pressure

A new similarity method for the ultimate strength of box girders subjected to the combined load of bending and lateral pressure

Analysis of the overall structural strength and optimization recommendations for ultra-large container ships based on the improved equivalent design wave method

Dynamic Ultimate Hull Girder Strength Analysis on a Container Ship under Impact Bending Moments

Mechanical properties analysis of the naval ship similar model with an integrated sandwich composite superstructure

Numerical Study For The Progressive Collapse Of Scale Model For Ulcs Hull Girder Under Longitudinal Bending

Ultimate strength assessment of ship hull structures subjected to cyclic bending moments

Ultimate Longitudinal Strength of Composite Ship Hulls

Multi-objective optimization for ultimate strength and stiffness of ship hull