Electrical and magnetic properties of low-temperature sintered xBa0.6Sr0.4TiO3 + (1 - x)Ni0.2Cu0.2Zn0.62O(Fe2O3)0.98 composite ceramics

Li-na Su,Peng Liu,Ying He,Jian-ping Zhou,Lei Cao,Cheng Liu,Huai-wu Zhang
DOI: https://doi.org/10.1016/j.jallcom.2010.01.029
IF: 6.2
2010-01-01
Journal of Alloys and Compounds
Abstract:For the purpose of multilayer chip electromagnetic interference (EMI) filters, a series of xBa0.6Sr0.4TiO3 (BST)+(1−x)Ni0.2Cu0.2Zn0.62O(Fe2O3)0.98 (NiCuZn ferrite) (0≤x≤60wt.%) composite ceramics were primarily prepared by a solid-state reaction method. With addition of 3wt.% Bi2O3, all the composite ceramics can be sintered to a density >95% of theoretical density at 925°C. The effects of composition x on the sintering behaviors, phase compositions and electromagnetic properties of BST+NiCuZn ferrite composite materials were investigated. X-ray diffraction (XRD) results showed that the composites were composed of BST and NiCuZn phases. The ions’ diffusion was found to take place between NiCuZn ferrite and BST, which affected the electrical properties of the ceramics. With an increase of BST content x, the dielectric constant of the composites increases and the permeability decreases. For the specimens with 40wt.% Ba0.6Sr0.4TiO3–60wt.% Ni0.2Cu0.2Zn0.62O(Fe2O3)0.98, the good dielectric (ɛr=48, tanδ|ɛ=0.01) and magnetic properties (μ=20.8, tanδ|10MHz=0.03) have been obtained at 950°C. Meanwhile, it exhibited excellent frequency stability which was up to fr=100MHz.
What problem does this paper attempt to address?