Abstract:In the electromagnetic levitation experiment, the liquid flow in the undercooled liquid alloy remarkably affects the relevant thermodynamic property measurement and solidification microstructure. Therefore, it is of great importance to understand the fluid convection inside the undercooled melt. Theoretical calculation and electromagnetic levitation experiment have been used to investigate the internal velocity distribution and rapid solidification mechanism of Fe50Cu50 alloy. Based on axisymmetric electromagnetic levitation model, the distribution patterns of magnetic flux density and inducted current for levitated Fe50Cu50 alloy are calculated together with the mean Lorenz force. The Navier-Stokes equations are further taken into account in order to clarify the internal fluid flow. The results of the theoretical calculation reveal that the fluid velocity within levitated melt is strongly dependent on three factors, i.e., current density, current frequency and melt undercooling. As one of these factors increases, the maximum fluid velocity decreases while the average fluid velocity increases. Meanwhile, the area with fluid velocity larger than 100 mm·-1 is significantly extended. Furthermore, the fluid flow within levitated melt displays an annular tubular distribution characteristic. The Fe50Cu50 alloy melt is undercooled and solidified under electromagnetic levitation condition. In this undercooling regime △ T50Cu50 alloy melt has suppressed phase separation substantially. Once the undercooling attains a value of 150 K, metastable phase separation leads to the formation of layered pattern structure consisting of floating Fe-rich zone and sinking Cu-rich zone. A core-shell macrosegregation morphology with the Cu-rich zone distributed in the center and outside of the sample and Fe-rich zone in the middle occurs if the undercooling increases to 204 K. With the enhancement of undercooling after phase separation, the grain size of α -Fe dendrites in Cu-rich zone presents a decreasing trend. In contrast to the phase separated morphology of Fe50Cu50 alloy under the glass fluxing condition, the phase separated morphologies show obviously different characteristics. In such a case, the forced convection induced by electromagnetic stirring results in the formation of wavy interface between Fe-rich and Cu-rich zones, the distorted morphology of the Cu-rich spheres distributed in the Fe-rich zone, and the increased appearance probabilities of Cu-rich spheres at the upper part of electromagnetically levitated sample. Experimental observations demonstrate that the distribution pattern of Cu-rich spheres in Fe-rich zone is influenced by the tubular fluid flow inside the melt.

Influence of Electromagnetic Fields on Microstructures and Solute Element Distribution of 7050 Aluminum Alloy During the Solidification

Effect of Electromagnetic Parameters on 7050 Aluminum Alloy Solidification Structure and Element Distribution

Research situation and prospect of influence of electromagnetic field on the solidification structure of aluminum and magnesium alloys

Effect of Alternating Magnetic Field on Solidification Microstructure of 7050 Aluminium Alloy

Effects of Electromagnetic Field on the Cooling Curve and Solidification Structure of Al-Si Alloy

Fluid Convection and Solidification Mechanisms of Liquid Fe50cu50 Alloy under Electromagnetic Levitation Condition

Effect of Electromagnetic Power on the Microstructure and Properties of 2219 Aluminum Alloy in Electromagnetic Continuous Casting Technology

Influence of ultrasonic field on solidification microstructure of 7050 aluminum alloy

Effect of Electromagnetic Fields on Microstructure and Mechanical Properties of Sub-Rapid Solidification-Processed Al–Mg–Si Alloy During Twin-Roll Casting

Effect of Low-Frequency Magnetic Field on Microstructures and Macro Segregation of Horizontal Direct Chill Casting 7075 Aluminum Alloy

Effect of 7050 Aluminum Alloy Melt Treated by Ultrasonic on Macrosegregation in Ingot

Microstructure and Properties of Al-Si Alloys under Intermediate Frequency Electromagnetic Field

Microstructure and Macro-Segregation Law of Ultrasonic Cast 7050 Aluminum Alloy Ingots

Effect of ultrasonic and electromagnetic fields on solidification structure of hypoeutectic Al -Si alloy

Effect of Outfield Treatment on Structure Refinement of Horizontal Continuous Casting Al-1Si Alloy

Effect of Electromagnetic Field on Microstructure and Properties of Cu-Cr-Co-Si Alloy

Influences of Rectangular Wave Magnetic Field on Solidification Structure and Properties of 7A04 Aluminum Alloy

Solidification Structure of 6063 Alloy under Pulsed Magnetic Field

Effect of Low-Frequency Electromagnetic Casting on Micro-Structure and Macro-Segregation of 5A90 Alloy Ingots

Effect of middle frequency electromagnetic field on surface quality of continuous casting aluminum alloy ingot

Effect of low-frequency electromagnetic field on microstructures and macrosegregation of ?270 mm DC ingots of an Al?Zn?Mg?Cu?Zr alloy