Abstract:It is difficult for the conventional single-stage compression auto-cascade refrigeration cycle to achieve higher refrigeration efficiency and lower refrigeration temperature, because the stream rich in high boiling point component from the phase separator bottom undergoes a single-stage compression process of high pressure lift ratio. Based on the concept of the evaporating temperature of the high/low boiling point component matching the grade compression of two streams from the phase separator, a component-based double-stage compression auto-cascade refrigeration (CDACR) cycle using R170/R600a is proposed in this paper. In the novel cycle, one dedicated compressor with two suction ports is used as the substitute for a conventional compressor with the sole suction port to realize grade compression process of the component of the refrigerant mixtures, and the stream enriched with high boiling point component from the separator bottom is sucked into the high-pressure suction port and undergoes the low-pressure-lift-ratio compression process, while the stream rich in low boiling point component from the separator top is sucked into the low-pressure suction port and executes the high-pressure-lift-ratio compression process, so as to cut down the compressor power consumption and obtain a lower refrigeration temperature. The mathematical model of the proposed cycle is developed to evaluate the thermodynamic performance of the system and comparisons with the conventional single-stage compression auto-cascade refrigeration (SCACR) cycle are also discussed. The results indicate that application of the component-based grade compression to the conventional auto-cascade refrigeration cycle dramatically improves the performance of the CDACR cycle, and there is optimum composition ratio of refrigerant mixtures for the CDACR cycle to obtain the highest coefficient of performance ( COP ). It is also shown that the performance of the CDACR cycle is significantly better than that of the SCACR cycle. As compared with those of the SCACR cycle, the compressor power consumption of the CDACR cycle decreases by 44.83%-53.17%, and its COP increases by 0.34–0.43, as the evaporating temperature at the evaporator outlet ranges from −60 °C to −40 °C. In addition, at the condenser outlet temperature in the range of 26 °C- 40 °C, the compressor power consumption for the proposed cycle is 37.74%-47.03% lower than that for the SCACR cycle, while COP of the CDACR cycle is 0.29–0.42 higher than that of the SCACR cycle.

Experimental study and optimization of a dual model cycle for cascade refrigerator

Performance Analysis of a Modified Autocascade Refrigeration Cycle with an Additional Evaporating Subcooler

Performance evaluation on an internal auto-cascade refrigeration cycle with mixture refrigerant R290/R600a

Equivalent Cycle and Optimization of Auto-Cascade Absorption Refrigeration Systems

Performance Evaluation of a Modified Refrigeration Cycle with Parallel Compression for Refrigerator-Freezer Applications

Experimental Study on a −60 °C Cascade Refrigerator with Dual Running Mode

A novel absorption refrigeration cycle

Theoretical Study on a Modified Single‐stage Autocascade Refrigeration Cycle with Auxiliary Phase Separator

Energy and exergy analysis of a new ejector enhanced auto-cascade refrigeration cycle

Numerical investigations on the performance of a single-stage auto-cascade refrigerator operating with two vapor-liquid separators and environmentally benign binary refrigerants

A Study On A New Auto-Cascade Refrigerating Cycle

Advanced Exergy Analysis on a Modified Auto-Cascade Freezer Cycle with an Ejector

Theoretical Study on Design of Two-Stage Temperature Refrigerator Using Auto-Cascade Refrigeration Cycle

Integrated product selection and process optimization for cascade refrigeration system

The Optimization and Experimental Study of Auto-Cascade Refrigeration System

Improvement on the Flow of Two-Stage Temperatures Refrigerator Using Auto Cascade Cycle and Analysis of the Performance

Performance Analysis of a Modified Ejector-Enhanced Auto-Cascade Refrigeration Cycle

Proposal and performance study on a component-based double-stage compression auto-cascade refrigeration cycle

Performance Assessment of an Ejector Enhanced Dual Temperature Refrigeration Cycle for Domestic Refrigerator Application

Experimental Research on a CO_2 Based Cascade Refrigeration System

Performance of a Single-Stage Auto-Cascade Refrigerator Operating with a Rectifying Column at the Temperature Level of −60 °C