Abstract:In recent years, with the prohibition of CFC by international community, the cascade refrigeration cycle is showing the development of new features, in which Auto-cascade refrigeration cycle with its simple structure, reliable performance particularly has aroused widespread concern. This paper puts forward using the distillation column instead of the multi-stage segregation device, which make full use of the distillation column to provide good enough conditions for the vapour-liquid contact,creat a greater contact surface, ensure the space and time of heat and mass transfer between each component of refrigerant and lubricant, in order to achieve high efficient separation.This cycle uses environment-friendly non-azeotropic mixed (NARM) R600a\R23\R50 as refrigerant. The improved PT equation is used, according to the quality and energy conservation of the distillation column and heat exchanger to carry on thermodynamic analysis. On this basis, the selection and the calculation of the experimental apparatus and equipment carried out to self-made a auto-cascade refrigeration cycle prototype. Through the cooling test of the eight different mixture ratio, the best quality ratio is found and the minimum temperature the ratio can reach. Through repeated experiments, study that the cycle compression ratio of one component affect on the temperature inside the ultra-low temperature box, the cycle compression ratio of the different components under the same temperature inside the ultra-low temperature box affect on the system performance, and the three throttle, cold boxes cycle high and low pressure ratio and distillation column reflux liquid extraction rate affect on the system performance. The prototype broke the traditional method that access to the depth refrigeration needs multiple refrigeration compressors, only use a single-stage air-conditioning refrigeration compressor with lubrication, to achieve high and low boiling point component through the use of distillation devices, including high-performance lubricant separation, successfully reduced to below -80 degrees C, and system stability. According to the results of a series of experiments, analyzed the ratio of working fluid, cycle pressure ratio, distillation column extraction rate of liquid return, increase heat and the expenditure component's effect on the temperature in the ultra-low temperature box and the COP of system.

Experimental Research on a CO_2 Based Cascade Refrigeration System

Utilization of Ultra-Low Temperature Heat by a Novel Cascade Refrigeration System with Environmentally-Friendly Refrigerants

Investigation on an Innovative Cascading Cycle for Power and Refrigeration Cogeneration

A Study On A New Auto-Cascade Refrigerating Cycle

Equivalent Cycle and Optimization of Auto-Cascade Absorption Refrigeration Systems

Experimental Study on NH_3/CO_2 Cascade Refrigeration System

Experimental Research on the R134a/CO2 Cascade Refrigeration System

Performance Study on a Low-Temperature Absorption–compression Cascade Refrigeration System Driven by Low-Grade Heat

Experimental Study on a −60 °C Cascade Refrigerator with Dual Running Mode

A novel low-temperature absorption–compression cascade refrigeration system

Visualization Experiments of a Novel CO2 Solid-Gas Two Phase Flow Based Refrigeration System

Thermodynamic Analysis of an NH3/CO2 Cascade Refrigeration System with Subcooling in the Low-Temperature Circuit Utilizing the Expansion Work

A Novel CO2 Refrigeration System Achieved by CO2 Solid–gas Two-Phase Fluid and Its Basic Study on System Performance

Experimental study and optimization of a dual model cycle for cascade refrigerator

Experimental Investigation on the Performance of Nh3/Co2 Cascade Refrigeration System with Twin-Screw Compressor

Thermodynamic study of carbon dioxide transcritical refrigeration cycle with dedicated subcooling and cascade recooling

Experimental Study on Throttle Opening in Auto-cascade Refrigeration System

Study on Application Scope for CO2 Cascade Refrigeration System and CO2 Secondary Refrigerant System

Integrated product selection and process optimization for cascade refrigeration system

1846 Study on Characteristic of Novel CO_2 Heat Pump with Cryogenic Temperature

Theoretical analysis of three CO2/C3H8 (R744-R290) cascade refrigeration systems with precooling processes in low-temperature circuits