Abstract:In this paper, we use the nonlinear hardening stiffness of drive mode deal with the contradiction between gain and bandwidth of the linear micro-gyroscope, to improve the bandwidth and gain in sense direction. Firstly, in order to adjust the distance between two resonant peaks, we changed an incomplete two-degree-of-freedom(2-DoF) sense mode system of the micro-gyroscope into a complete 2-DoF system. Afterward, according to the given nonlinear coefficient of stiffness of drive mode, the structure size of driving micro-beams was designed to obtain a nonlinear micro-gyroscope with controllable stiffness. Finally, we investigated the effects of peaks spacing, damping, and driving nonlinearity on gain and bandwidth, and the nonlinear micro-gyroscope was optimized by orthogonal experiment method and response surface method. The results reveal that the peaks spacing has a great influence on the gain and bandwidth of both linear and nonlinear micro-gyroscopes. The larger the peaks spacing, the lower the gain, but higher gain can be achieved when the resonant frequency of the drive mode is close to the lower-order resonant frequency of the sense mode. Driving nonlinearity leads to the response peak of the Coriolis force to have a hardening characteristic, thus forming a wide platform in the sense direction. Hardening of the response peak of the Coriolis force allows the micro-gyroscope to obtain a higher gain while the bandwidth of the sense mode is also greatly improved. In addition, parameter optimization can make the gain and bandwidth of the micro-gyroscope optimal. When the peaks spacing is small and the nonlinear stiffness coefficient is about 1012.2, under the premise that the gain is basically constant, the bandwidth of the sense mode increases about 1.76 times compared with the linear gyroscope. Damping can suppress the influence of nonlinearity in a micro-gyroscope system. Within a certain range, the frequency response of the nonlinear micro-gyroscope tends to be a linear system with the increase in damping, resulting in narrower bandwidth and lower gain.

A Review of Micro-gyroscope Based on Coriolis Acceleration

The development of micro-gyroscope technology

MEMS and MOEMS Gyroscopes:A Review

Micro Gyroscope Based on Electrostatically Levitated Rotor and Its Key Techniques

Three-Dimensional Performance Evaluation of Hemispherical Coriolis Vibratory Gyroscopes

Design and Analysis of Optomechanical Micro-Gyroscope for Angular-Vibration Detection

A Novel Microelectromechanical Resonant Gyroscope

Review on Angular Accelerometer Development

Novel High-Precision Micro-Gyroscope Based on Cavity Optomechanical System

Modeling and Analysis of Coriolis Offset for Micromachined Gyroscope with Electrostatic Driving and Capacitive Sensing

Design of a novel micro thermo-fluidic gyroscope

Virtual Rate-Table Method for Characterization of Microgyroscopes

ON-LINE SELF-TESTING FOR MICRO-MACHINED GYROSCOPES

Structural parameters study on a novel micro thermo-fluidic gyroscope

Design, Dynamics, and Optimization of a 3-DoF Nonlinear Micro-Gyroscope by Considering the Influence of the Coriolis Force

Research Development of MEMS Micro-Gyroscopes

Design and Critical Technologies of an Accelerometer North-Seeking System

Development and Evaluation of Optical Passive Resonant Gyroscopes

A BRIEF REVIEW ON THE DEVELOPMENT AND THEORY OF NON-GYROS INERTIAL MEASUREMENT UNIT

Key technology,innovation design and current development of micro gyroscope with levitation rotor

A Decoupled Microelectromechanical Resonant Gyroscope