Abstract:Extraction and identification of surface active substance of Alcaligenes sp. S-XJ-1, as well as description of its emulsion breaking process were conducted to reveal the demulsifying characteristics of this demulsifying strain. Alkali solvent was adopted in the extraction process with conditions optimized as 35 degrees C, 0.08 mol x L(-1) of alkali concentration, 12 g x L(-1) of sample to solution ratio, and 4 h of extraction time by launching both single-factor and orthogonal tests. Under this optimal condition, the extracted surface active substance (the extraction ratio was 36.1%) achieved 77% emulsion breaking ratio for 500 mg x L(-1) within 48 h. FT-IR showed the existence of glycolipids, lipids and proteins in the surface active substance, the molecular weight of which mainly scattered between 55 and 61 256. Saccharides, lipids and proteins were identified as the three chief components in surface active substance with the content of 22.2%, 7.5% and 13.4%, respectively. The proteins were further proved to take the most responsibility for the emulsion breaking ability. Moreover, obvious difference in the emulsion breaking process was demonstrated between the original demulsifying strain S-XJ-1 and the extracted surface active substance by real time observation of Turbiscan Lab Expert. The results suggested that the demulsifying efficiency of the strain was jointly contributed by its surface active substance and demulsifying cell morphology, and the former possessed higher functional priority than the latter.

[Production of Biodemulsifier by Alcaligenes Sp. S-XJ-1 Using Waste Diesel Oil].

Production of biodemulsifier by Alcaligenes sp. XJ-T-1 with waste frying oil

Optimization of Biodemulsifier Production from Alcaligenes Sp. S-XJ-1 and Its Application in Breaking Crude Oil Emulsion.

Application of Waste Frying Oils in the Biosynthesis of Biodemulsifier by A Demulsifying Strain Alcaligenes Sp S-Xj-1

DEMULSIFICATION OF WATER-IN-OIL EMULSIONS BY A DEMULSIFYING Alcaligenes Sp STRAIN GROWTH ON N-ALKANE

Production of Biodemulsifier by One Strain of Dietzia sp.S-JS-1 in the Use of Waste Frying Oils

Analysis of Biological Demulsification Process of Water-in-oil Emulsion by Alcaligenes Sp. S-XJ-1.

Application of rhamnolipid as a novel biodemulsifier for destabilizing waste crude oil.

Separation and Purification of Alcaligenes Biodemulsifier by Dichloromethane-Water Extraction and Silica Gel Column Chromatograph

Properties of bio-demulsifiers produced by Dietzia sp. S-JS-1 using wasted frying oils

Evaluation of screening methods for demulsifying bacteria and characterization of lipopeptide bio-demulsifier produced by Alcaligenes sp.

Comparison Between Waste Frying Oil and Paraffin As Carbon Source in the Production of Biodemulsifier by Dietzia Sp. S-JS-1.

Carbon source dependence of cell surface composition and demulsifying capability of Alcaligenes sp. S-XJ-1.

Chemically Modified Surface Functional Groups of Alcaligenes Sp. S-XJ-1 to Enhance Its Demulsifying Capability

Saponin-Enhanced Biomass Accumulation and Demulsification Capability of the Demulsifying Bacteria Alcaligenes Sp S-Xj-1

Separation and Characterization of Effective Demulsifying Substances from Surface of Alcaligenes Sp S-Xj-1 and Its Application in Water-In-Kerosene Emulsion

Extraction of surface active substance and analysis of demulsifying characteristics for the demulsifying strain Alcaligenes sp. S-XJ-1

Effective biodemulsifier components secreted by Bacillus mojavensis XH-1 and analysis of the demulsification process

Turbiscan Lab ® Expert Analysis of the Biological Demulsification of a Water-in-oil Emulsion by Two Biodemulsifiers.

Production and Characterization of a New Glycolipid, Mannosylerythritol Lipid, from Waste Cooking Oil Biotransformation by Pseudozyma Aphidis ZJUDM34.

Production of Rhamnolipids with Different Proportions of Mono-Rhamnolipids Using Crude Glycerol and a Comparison of Their Application Potential for Oil Recovery from Oily Sludge.