Abstract:Given their advantage of suppressing grating lobes, randomly arranged linear arrays have potential for use in ultrasonic treatment. The current work proposes a method based on genetic algorithm to optimize the random arrangement of array elements, so that the suppression effect of grating lobes can be significantly improved with reduced calculating time. The maximum and average kerfs of array elements are used as genes, and the ratio of the maximum to the secondary maximum sound pressure at the focal plane is used as the optimized target. Typically, the calculation requirements of the current method can be reduced to ~ 25% of the traversing method. We further discuss how the kerf width, the effective ratio of element areas and the ratio of focal distance to array aperture affect the suppression of grating lobes. For a typical linear array with 32 elements (1-MHz operating frequency, 1.5-mm element width and 150-mm focal distance), the results suggest that the grating lobes are suppressed well when (1) the ratio of maximum width to average width of the element is between 5 and 8, (2) the ratio of the effective element area to the area of the whole array is between 0.5 and 0.9, and (3) the ratio of the effective emission aperture to the actual emission aperture of the array is as large as possible. Based on optimized parameters, an experimental array was fabricated and the measured results of corresponding sound field were entirely consistent with the simulated results (Given her role as an Associate Editor of this journal, Juan Tu had no involvement in the peer-review of articles for which she was an author and had no access to information regarding the peer-review. Full responsibility for the peer-review process for this article was delegated to another Editor of this journal.).

A way of optimization of baffle design when changing the incident angle and frequency

Optimization of Feedback Parameters of Active Vibration Control System with Genetic Algorithm

An Improved Genetic Algorithm for Thinning Acoustic Array.

Aerodynamic Optimization Design of Airfoil Configurations Based on Cascade Feedforward Neural Network

Genetic algorithm optimization for ultra wideband impulse radio to mitigate multi-band jam interference

Design Optimization of Metamaterial Units Using a Genetic Algorithm Based Optimization Methodology

An Improved Genetic Algorithm for Global Optimization of Electromagnetic Problems

An Optimization Strategy of Composite Structure for Underwater Sound-Absorbing via Combining Response Surface Method and Quantum Genetic Algorithm

Synthesis of Unequally Spaced Array by Genetic Algorithm and Convex Optimization

Noise Pollution Reduction Through a Novel Optimization Procedure in Passive Control Methods

Optimization design of the sound absorbing structure of double-layer porous metal material with air layer based on genetic algorithm

Optimization of a Random Linear Ultrasonic Therapeutic Array Based on a Genetic Algorithm.

Optimization design of forebody shape of an underwater axisymmetric body for transition delay using a genetic algorithm

Space Active Noise Control System Design with Multi-Objective Genetic Algorithms

Dynamic Algorithm for Fitness Function Greatly Improves the Optimization Efficiency of Frequency Selective Surface for Better Design of Radar

Optimization Design of Acoustic Performance of Underwater Anechoic Coatings

An optimal design for subsonic wing planar shape and twisted angle by a modified genetic algorithm

Active Noise Control of Enclosed Harmonic Fields by Using BEM-based Optimization Techniques

A multi-objective optimization design method for underwater composite sandwich structures with high acoustic transmission and low vibration performance

Optimal Active Noise Control of Sound Field in Enclosures

Optimizing Frequencies of Functionally Graded Material Plates via Multi-Objective Genetic Algorithm: Positioning Point Supporters for Maximum Performance