Abstract:To clarify asymmetric mechanical behaviors of the extruded Mg-4.58Zn-2.6Gd-0.18Zr alloy during room temperature tension and compression, the evolution of microstructure, texture and strain hardening rate were systematically investigated when loading along the extrusion direction (ED). The results found that the as-extruded alloy exhibited <101̅0>-<112̅0> double-peak fiber texture, leading to obvious tension compression yield asymmetry and compressive yield plateau. Fiber texture kept stable and only texture intensity gradually decreased with the increasing tensile strain, while fiber texture was exhausted due to the extension twinning and <0001> texture component was aggravated with the increasing compressive strain. Moreover, twinning parts within grains with <101̅0> fiber texture was re-oriented to the c-axis paralleling to the ED, and that in <112̅0> fiber texture deviated about 30° away from the ED. This soft orientation would be finally rotated to the <0001> paralleling to the ED under the action of basal slip, explaining why the <0001> pole dispersed at first and then concentrated with the increasing compressive strain. Three stages of strain hardening rate were both observed for tensile and compressive tests, while increment of Stage II was only observed under compression. Stage II in compression could be further divided into two parts with different slopes. Such phenomenon was seldom reported in Mg alloys, which was caused by different propagation and re-orientation of extension twinning in double-peak fiber texture, and weakened the effect of twin lamella segmentation with the increasing compressive strain. Findings in this work given us a better understanding of asymmetric tensile-compressive mechanical behaviors of extruded Mg alloys with double-peak fiber texture.

Influence of deformation processing on the tensile/compressive asymmetry in wrought Mg-3Al-Zn alloy

Ex-situ EBSD Analysis of Yield Asymmetry, Texture and Twinning Development in Mg–5Li–3Al–2Zn Alloy During Tensile and Compressive Deformation

The influence of initial texture, microstructure and deformation behavior on the low mechanical anisotropy of extruded Mg alloy tube

Simulation of Texture Evolution and Deformation Mechanism in Mg-3Al-1Zn Alloy During Uniaxial Compression

Orientation factor analysis of deformation mechanisms under special processing techniques in AZ31 magnesium alloys

On the Anisotropic Deformation of AZ31 Mg Alloy under Compression

Mechanical Anisotropy of Extruded Mg-10gd-2y-0.5zr Alloy

Effect of texture types on microstructure evolution and mechanical properties of AZ31 magnesium alloy undergoing uniaxial tension deformation at room temperature

Anisotropy in Tensile Behavior of an Extruded Mg-4.50Zn-1.13Ca (wt.%) Alloy

Effect of the boundary and textures of grains on anisotropy of AZ31 magnesium alloy

Relationship Between Textures and Deformation Modes in Mg–3Al–1Zn Alloy During Uniaxial Tension

Study on the low mechanical anisotropy of extruded Mg-Zn-Mn-Ce-Ca alloy tube in the compression process

Textures and Deformation Mechanisms of Az31 Magnesium Alloys under Special Processing Technologies

Quasi-in-situ Analysis of Dependency of Deformation Mechanism and Work-Hardening Behavior on Texture in Mg-2Zn-0.1Ca Alloy

Effect of equal channel angular extrusion process on deformation behaviors of Mg-3Al-Zn alloy

Influences of load direction and grain size on tension-compression yield asymmetry of extruded AZ31 magnesium alloy

Asymmetric Tension-Compression Mechanical Behaviors of Extruded Mg-4.58Zn-2.6Gd-0.18Zr Alloy with Double-Peak Fiber Texture

Formation of Gradient Microstructure and Elimination of Tension-Compression Yield Asymmetry of the Extruded Mg-4.58Zn-2.6Gd-0.18Zr Alloy Via Free-End Torsion

Strain Path Dependence of Texture and Property Evolutions on Rolled Mg-Li-Al-Zn Alloy Possessed of an Asymmetric Texture

Anisotropy of deformation behavior of AZ31 magnesium alloy sheets

The Influence of Developed Texture on the Mechanical Anisotropy and Deformation Modes of an As-Extruded Mg-Zn-Zr Alloy