Abstract:Micro and nano technologies are of increasing importance in microfluidics devices used for electroporation (electroporation – the permeabilization of the cell membrane with brief high electric field pulses). Electrochemical reactions of electrolysis occur whenever an electric current flows between an electrode and an ionic solution. It can have substantial detrimental effects, both on the cells and solutions during the electroporation. As electrolysis is a surface phenomenon, between electrodes and solution, the extent of electrolysis is increased in micro and nano electroporation over macro-electroporation, because the surface area of the electrodes in micro and nano electroporation is much larger. A possible way to eliminate the electrolytic effect is to develop non-electrolytic microelectroporation by coating the microelectroporation devices with a dielectric insulating layer. In this study, we examine the effect of a dielectric insulating layer on the performance of a singularity microelectroporation device that we have recently designed. Using numerical analysis, we study the effects of various design parameters including, input sinusoidal voltage amplitude and frequency, geometrical configuration and material electrical properties on the electroporation performance of the non-electrolytic microelectroporation device. In the simulation, we used properties of four real dielectric materials and four solutions of interest for microelectroporation. We characterized the effect of various design parameters of relevance to singularity based microelectroporation, on non-electrolytic microelectroporation. Interestingly, we found that the system behaves in some aspects as a filter and in many circumstances saturation of performance is reached. After saturation is reached, changes in parameters will not affect the performance of the device.

A DEP-assisted Single-Cell Electroporation Chip with Low Operation Voltage

Non-electrolytic microelectroporation

Simultaneous electroporation and dielectrophoresis in non-electrolytic micro/nano-electroporation.

Etching-Engineered Low-Voltage Dielectrophoretic Nanotweezers for Trapping of Single Molecules.

Controllable in-situ cell electroporation with cell positioning and impedance monitoring using micro electrode array

Soft Electroporation Through 3D Hollow Nanoelectrodes.

Efficient and High-Throughput Electroporation Chips

An integrated micro-chip for cell array positioning, in-situ impedance measurement and electroperation

Electroporation System Based on MEMS Micro-Electrode Chip

Single-cell individualized electroporation with real-time impedance monitoring using a microelectrode array chip

Flow-through Cell Electroporation Microchip Integrating Dielectrophoretic Viable Cell Sorting.

A Portable and High Efficiency System for Cell Electroporation under Low Voltage.

Cell Trapping Utilizing Insulator-based Dielectrophoresis in The Open-Top Microchannels

A Self-Digitization Dielectrophoretic (SD-DEP) Chip for High-Efficiency Single-Cell Capture, On-Demand Compartmentalization, and Downstream Nucleic Acid Analysis

A symmetrical hyperbolic formatted microchip for rapid optimization of electroporation

A high performance electroporation chip integrating multi-well plate and annular interdigital microelectrodes

A Flow-Through Electroporation Chip Integrated with Viable Cell Sorting Based on Dielectrophoresis

A low-cost smartphone controlled portable system with accurately confined on-chip 3D electrodes for flow-through cell electroporation

Low-voltage electroporation with fluidic microelectrodes

On-chip dielectrophoretic single-cell manipulation

Dielectric passivation layer as a substratum on localized single-cell electroporation