Abstract:In this study, a neural network approach is presented for the prediction and control of surface roughness in a computer numerically controlled (CNC) lathe. Experiments have been performed on the CNC lathe to obtain the data used for the training and testing of a neural network. The parameters used in the experiment were reduced to three cutting parameters which consisted of depth of cutting, cutting speed, and feed rate. Each of the other parameters such as tool nose radius, tool overhang, approach angle, workpiece length, workpiece diameter and workpiece material was taken as constant. A feed forward multi-layered neural network was developed and the network model was trained using the scaled conjugate gradient algorithm (SCGA), which is a type of back-propagation. The adaptive learning rate was used. Therefore, the learning rate was not selected before training and it was adjusted during training to minimize training time. The number of iterations was 8000 and no smoothing factor was used. Ra, Rz and Rmax were modeled and were evaluated individually. One hidden layer was used for all models while the numbers of neurons in the hidden layer of the Ra model were five and the numbers of neurons in the hidden layers of the Rz and Rmax models were ten. The results of the neural network approach were compared with actual values. In addition, inasmuch as the control of surface roughness is proposed, a control algorithm was developed in the present investigation. The desired surface roughness was entered into the control system as a reference value and the controller determined the cutting parameters for these surface roughness values. A new surface roughness value was determined by sending the cutting parameters to the observer (ANN block). The obtained surface roughness was fed back to the comparison unit and was compared with the reference value and the difference surface roughness was then sent to the controller. The iteration was continued until the difference was reduced to a certain value of surface roughness which could be permitted for machining accuracy. When the surface roughness reached the permitted value, these cutting parameters were sent to the CNC turning system as input values. In conclusion, both the surface roughness values corresponding to the cutting parameters and suitable cutting parameters for a certain surface roughness can be determined prior to a machining operation using the ANN and control algorithm.

Neural network based prediction of surface roughness in high speed milling of metal matrix composites

An Intelligent Prediction of Surface Roughness on Precision Grinding

Adaptive network-based fuzzy inference system with leave-one-out cross-validation approach for prediction of surface roughness

Prediction and Control of Surface Roughness for the Milling of Al/SiC Metal Matrix Composites Based on Neural Networks

Study on Analytical Model of Surface Roughness Prediction in NC Machining

Intelligent Prediction for Surface Roughness of Cnc Surface Grinding Machine Tool Based on Bayesian Network

Prediction and control of surface roughness in CNC lathe using artificial neural network

Optimizing Cutting Conditions and Prediction of Surface Roughness in Face Milling of AZ61 Using Regression Analysis and Artificial Neural Network

Prediction of surface roughness in CNC face milling using neural networks and Taguchi's design of experiments

Prediction of surface roughness in duplex stainless steel face milling using artificial neural network

Optimization of surface roughness and cutting force during AA7039/Al2O3 metal matrix composites milling using neural networks and Taguchi method

Prediction of surface roughness in milling process using vibration signal analysis and artificial neural network

The development of an ANN surface roughness prediction system of multiple materials in CNC turning

Modeling surface roughness based on artificial neural network in mould polishing process

Prediction of surface roughness in CNC end milling by machine vision system using artificial neural network based on 2D Fourier transform

The use of support vector machine, neural network, and regression analysis to predict and optimize surface roughness and cutting forces in milling

Surface roughness predictive modeling: neural networks versus regression

ANN Surface Roughness Optimization of AZ61 Magnesium Alloy Finish Turning: Minimum Machining Times at Prime Machining Costs

Artificial intelligence for automatic prediction of required surface roughness by monitoring wear on face mill teeth

Prediction of Metal Additively Manufactured Surface Roughness Using Deep Neural Network

Neural network-based prediction for surface characteristics in CO2 laser micro-milling of glass fiber reinforced plastic composite