Abstract:In this paper, the width and depth of rectangular surface-breaking defects were successfully gauged using an all-optical laser-ultrasonic system. The finite element method was used to simulate propagating paths of defect-induced reflected and transmitted Rayleigh waves. It is observed that most Rayleigh waves with wavelengths less than the depth of the defect are reflected by the defect. A small part of the Rayleigh waves with wavelengths greater than the depth of the defect directly transmits through the bottom edge of the defect without acting on the left edge of the defect. Based on the simulation results, a three-step detection method of width and depth gauging of rectangular surface-breaking defects is proposed. In the first step, the pulsed laser and detection laser are irradiated on one side of the defect. In the second step, the sample is moved to a certain distance to ensure that both lasers reach the other side of the defect. In the third step, two lasers are irradiated on both sides of the defect. The width and depth of the defect are calculated according to the arrival time of the incident, reflected, and transmitted Rayleigh waves, as well as the movement distance of the sample. Experimental results are consistent with the reference-results measured by using a digital microscope. The proposed three-step detection method is proved to be feasible in simultaneous measurement of the width and depth of rectangular surface-breaking defects. Furthermore, it may be potentially useful for measuring other types of defect structures.

Touch-Trigger Measurement of Micro-Cavity by Optical Fiber Coupling

Measurement of micro-cavity dimension by double optical fiber coupler based on OFMM's location

Measurement of micro-hole with high aspect ratio by double optical fibers coupling

Development Of Ultra-Precision Micro-Cavity Measurement Technique In Hit-Uoi

Research Progresses of Precision Measurement Technique for Micro-cavity

Fiber Probe for Micro-Hole Measurement Based on Detection of Returning Light Energy

A Simple Approach to Fiber-Based Tunable Microcavity with High Coupling Efficiency

A Micro-Coordinate Measurement Machine (cmm) for Large-Scale Dimensional Measurement of Micro-Slits

Assembled Cantilever Fiber Touch Trigger Probe for Three-Dimensional Measurement of Microstructures.

Subpixel Edge Location Method Proposed to Improve the Performance of Optical Fiber Spherical Coupling Probe During Dimensional Measurement of Micro-Cavities with High Aspect Ratio

Optical Fiber Probe Based On Spherical Coupling Of Light Energy For Inner-Dimension Measurement Of Microstructures With High Aspect Ratios

Fiber Deflection Probing Method Based on Micro Focal-Length Collimation

A Twin Fiber Bragg Grating Probe for the Dimensional Measurement of Microholes

Width and Depth Gauging of Rectangular Subsurface Defects Based on All-Optical Laser-Ultrasonic Technology

Measurement of Miniature Cavities Using a Confocal Microscopy with a Gradient-index Lens

Application of Optical Coherence Tomography to Distance Measurement of Optical Surface

Micro-inner-cavity Measurement Method Based on MAP/POCS Hybrid Algorithm

Microcavity Connceted With A Waveguide For Application To Optical Sensing

A Twin FBG Probe and Integration with a Microhole-Measuring Machine for the Measurement of Microholes of High Aspect Ratios

Highly Sensitive Optical Fiber Micro-Cavity Sensors

Delay Error and Compensation in Measurement of Micro-Scale Using Aiming and Triggering Method