Abstract:Ceramic cutting tool materials possess specific advantages, including high hardness, excellent wear resistance, and high chemical stability, making them unparalleled in the machining of difficult-to-process materials compared to traditional cutting tools. The mechanical performance of these materials is primarily determined by their microstructure. Therefore, it is necessary to simulate and optimize the microstructure of ceramic cutting tool materials to provide theoretical guidance for further enhancing their fracture toughness. In this paper, a simulation model based on sintering densification theory was proposed, coupling crystal plasticity with a three-dimensional cellular automaton, to investigate the impact of nanoparticle content, sintering temperature , sintering pressure, and holding time on grain growth in composite ceramic materials using spark plasma sintering (SPS). Furthermore, an evolution model for grain growth of TiB 2 -TiC-SiC nanocomposite ceramic materials in cutting tools is established, and the optimal sintering process parameters are obtained. Finally, SPS experiments were conducted. Under the conditions of a sintering temperature of 1600 °C, holding time of 7 min, and sintering pressure of 40 MPa, optimal mechanical performance composite ceramic cutting tool materials were prepared. The experimental results, including a hardness of 25.6 GPa, fracture toughness of 7.1 MPa·m 1/2 , and flexural strength of 628.2 MPa, were consistent with the simulation outcomes. This indicates that the designed simulation model for nanocomposite ceramic grain growth reliably reflects the physical process of grain growth in the material and provides valuable guidance for further understanding the mechanisms underlying grain growth.

Simulation of the Effect of Initial Grain Size of Matrix on Microstructure Evolution in Nano-Composite Ceramic Tool Material

Monte-Carlo simulation of grain growth in Vapor-Liquid-Solid phase sintered material

Monte-Carlo simulation of isotropic and anisotropic grain growth in liquid phase sintered ceramics

Micromechanical Simulation of Fracture Behavior of Nanostructured Metals with Bimodal Grain Size Distribution

Monte-carlo modeling for grain growth process in Vapor-Liquid-Solid phase sintered materials

Monte carlo based strategy to simulate the microstructure evolution of the short-fiber reinforced metal matrix composites

MONTE CARLO SIMULATION OF ANISOTROPIC GROWTH OF GRAINS DURING LIQUID PHASE SINTERING FOR CERAMICS

Principle and Application of Monte Carlo Potts Model Simulation in Microstructural Evolution

Studies and Technical Development of Computer Simulation for Sintering and Grain Growth

Three-dimensional modeling of grain structure growth within ceramic tool material

Simulating Effects of Pores on Grain Growth during Final Stage of Sintering in Ceramics through Phase Field Modeling

Monte-Carlo Simulation for the Grain Growth of Si3n4 During Sintering Process

Optimization of sintering parameters for fabrication of Al2O3/TiN/TiC micro-nano-composite ceramic tool material based on microstructure evolution simulation

Modeling morphology evolution and densification during solid-state sintering via kinetic Monte Carlo simulation

Numerical simulation of microstructure for stir casting of Al-Si/SiC p composites with particle pushing model

Grain evolution simulation of ceramic tool material in spark plasma sintering process based on an improved cellular automata model

Prediction of macroscopic effective elastic modulus of micro-nano-composite ceramic tool materials based on microstructure model

Study on Mechanical Properties of Multi-Scale and Multi-Phase Nanocomposite Ceramic Tool Materials

Hybrid Influences of Interphase and Grain-Size on Material Responses of CNT-reinforced Metal Matrix Composites

Finite Element Modelling of Mechanical Behavior of SiCp/Mg-6Zn-3Al Composites

Influence of SiC particle size on microstructure and mechanical properties of Al2O3-SiC nanocomposites