Abstract:In this paper, three manganese dioxide materials, alpha-MnO(2), beta-MnO(2), gamma-MnO(2) were tested as alternative cathodic catalysts to platinum (Pt) in air-cathode microbial fuel cells (MFCs). Prepared via hydrothermal method, the manganese dioxides were characterized by X-ray powder diffraction patterns (XRD), the Brunauer-Emmett-Teller (BET) method and their average oxidation states (AOS) were determined by the potential voltammetric titration method. The electro-catalytic activity of MnO(2) in neutral pH solution was determined by linear sweep voltammetry (LSV) and the results showed that all manganese dioxides can catalyze oxygen reduction reaction (ORR) in neutral medium with different catalytic activities. beta-MnO(2) appeared to hold the highest catalytic activity due to its highest BET surface area and AOS. Beta-MnO(2) was further used as cathode catalyst in both cube and tube air-cathode MFCs, in which using Klebsiella pneumoniae (K. pneumoniae) biofilm as biocatalyst and utilizing glucose as a substrate in the anode chamber. It was found that tube MFC produced higher output power, with the maximum volumetric power density of 3773+/-347 mW/m(3), than cube MFC. This study suggests that using beta-MnO(2) instead of Pt could potentially improve the feasibility of scaling up MFC designs for real applications by lowering production cost.

Enhancement of Electricity Generation and Sulfide Removal in Microbial Fuel Cells with Lead Dioxide Catalyzed Cathode

Sewage Sludge-Derived Carbon-Doped Manganese As Efficient Cathode Catalysts in Microbial Fuel Cells

Comparison of Sulfide Removal and Electricity Generation in Microbial Fuel Cells

Microbe-Assisted Sulfide Oxidation in the Anode of a Microbial Fuel Cell

Contribution of Sulfate-Reducing Bacteria to the Electricity Generation in Microbial Fuel Cells

Effect of cathode electron acceptors on simultaneous anaerobic sulfide and nitrate removal in microbial fuel cell

Effect of electrode types on simultaneous anaerobic sulfide and nitrate removal in microbial fuel cell (vol 134, pg 20, 2014)

Manganese dioxide as an alternative cathodic catalyst to platinum in microbial fuel cells

Effects of different Pt-M (M = Fe, Co, Ni) alloy as cathodic catalyst on the performance of two-chambered microbial fuel cells

Boosting power output in microbial fuel cell with sulfur-doped MXene/polypyrrole hydrogel anode for enhanced extracellular electron transfer process

Improving bioelectrochemical performance by sulfur-doped titanium dioxide cooperated with Zirconium based metal–organic framework (S-TiO 2 @MOF-808) as cathode in microbial fuel cells

Facile Synthesis of Cobalt Oxide As Electrocatalyst for the Oxygen Reduction Reaction in Microbial Fuel Cells

Biosynthesized Iron Sulfide Nanoparticles by Mixed Consortia for Enhanced Extracellular Electron Transfer in a Microbial Fuel Cell.

A Microbial Fuel Cell with CuCo2S4 As Cathode Catalyst for Peroxymonsulfate Activation: Effect of Electrons Transfer on RhB Removal and Catalyst Regeneration

Simultaneous Anaerobic Sulfide and Nitrate Removal Coupled with Electricity Generation in Microbial Fuel Cell

Simultaneous Sulfide Removal and Electricity Generation with Corn Stover Biomass As Co-Substrate in Microbial Fuel Cells

Synthesis and study of CuNiTiO3 as an ORR electrocatalyst to enhance microbial fuel cell efficiency

Carbonization and activation of inexpensive semicoke-packed electrodes to enhance power generation of microbial fuel cells.

Effect of the chemical oxidation demand to sulfide ratio on sulfide oxidation in microbial fuel cells treating sulfide-rich wastewater.

Bioelectrocatalytic reduction by integrating pyrite assisted manganese cobalt-doped carbon nanofiber anode and bacteria for sustainable antimony catalytic removal

Air-cathode preparation with activated carbon as catalyst, PTFE as binder and nickel foam as current collector for microbial fuel cells.