Abstract:BISURE (BIological SUlfide REmoval) systems are efficient biological systems for sulfide removal and elemental sulfur recovery. However, they often suffer from disturbance caused by filamentous sludge bulking during startup, which are inoculated with activated sludge. In this study, BISURE startup by increasing the influent substrate concentration (IC-mode) and speeding up the influent flow rate (IF-mode) were investigated to understand and avoid the disturbance. The results showed that the BISURE system could be successfully started up in both the IC mode and IF mode, but both modes could trigger filamentous sludge bulking by Thiothrix (a filamentous sulfur-oxidizing bacteria, F-SOB). "CSO going first, PSO following up" was an effective approach to control the filamentous sludge bulking during startup. The procedure mechanism of oxygen effect was revealed: the growth of zoogloeal SOB (Z-SOB) with its larger surface-to-volume ratio (SVR) was first promoted to achieve a "proportion advantage" over F-SOB in the bacterial community; the external location of Z-SOB was then fixed to achieve the "location advantage" over F-SOB in the sludge floc; finally, prior uptake of DO by Z-SOB was ensured to achieve a "sequence advantage" over F-SOB in the substrate utilization. After elimination of filamentous sludge bulking, the dominant SOB in the bacterial community in IC-mode were Thiobacillus, accounting for more than 90% of the population; while dominant SOB in IF-mode were Thiobacillus and Annwoodia, which together accounted for more than 60% of bacteria. These findings are helpful in characterizing biological desulfurization and going forward, should be important in further developing BISURE systems.

Rapid Start-Up of a High Performance Bio-Trickling Filter Removal of H2S

[Study on the Start-Up of an Innovative Polyethylene Carrier Biotrickling Filter Treating Waste Gas Containing Hydrogen Sulphide].

Start-up Evaluations and Biocarriers Transfer from a Trickling Filter to a Moving Bed Bioreactor for Synthetic Mariculture Wastewater Treatment.

H2S Gas Removal in the Biotrickling Filter with a Macroporous Carrier

Synergistic Effect of Chitosan-Based Sludge Aggregates CS@NGS Inoculum Accelerated the Start-Up of Biofilm Reactor Treating Aquaculture Effluent: Insights into Performance, Microbial Characteristics, and Functional Genes.

Removal of Hydrogen Sulfide in Cold Coal Gas by Anaerobic Bio-trickling Filter

Extremely acidic condition (pH<1.0) as a novel strategy to achieve high-efficient hydrogen sulfide removal in biotrickling filter: Biomass accumulation, sulfur oxidation pathway and microbial analysis

[The depth of the patellar groove of the femur (author's transl)].

Performance evaluation of H2S and NH3 removal by biological trickling filter reactors with various fillers under heterotrophic conditions

Adding organics to enrich mixotrophic sulfur-oxidizing bacteria under extremely acidic conditions—A novel strategy to enhance hydrogen sulfide removal

Low cost and renewable H2S-biofilter inoculated with Trichoderma harzianum

Performance and Optimization of Integrated Biogas Bio-desulfurization Reactor

Isolation of a carbon disulfide utilizing Thiomonas sp. and its application in a biotrickling filter

Removal of Hydrogen Sulfide in Biogas by DBD Plasma

Locally conservative, stabilized finite element methods for variably saturated flow

Study on simultaneous removal of H2S by biological aerated filter in the course of domestic sewerage treatment

Assessing the efficiency and microbial diversity of H2S-removing biotrickling filters at various pH conditions

Controlling Filamentous Sludge Bulking by Regulating Oxygen Supply in the Start of BISURE System

Product Form of Gas Containing Hydrogen Sulfide Treated by Biotrickling Bed

Simultaneous Removal of Sulfide and Nitrite by Anaerobic Bioprocess

Kinetic characteristics of biological simultaneous anaerobic sulfide and nitrite removal