Abstract:BISURE (BIological SUlfide REmoval) systems are efficient biological systems for sulfide removal and elemental sulfur recovery. However, they often suffer from disturbance caused by filamentous sludge bulking during startup, which are inoculated with activated sludge. In this study, BISURE startup by increasing the influent substrate concentration (IC-mode) and speeding up the influent flow rate (IF-mode) were investigated to understand and avoid the disturbance. The results showed that the BISURE system could be successfully started up in both the IC mode and IF mode, but both modes could trigger filamentous sludge bulking by Thiothrix (a filamentous sulfur-oxidizing bacteria, F-SOB). "CSO going first, PSO following up" was an effective approach to control the filamentous sludge bulking during startup. The procedure mechanism of oxygen effect was revealed: the growth of zoogloeal SOB (Z-SOB) with its larger surface-to-volume ratio (SVR) was first promoted to achieve a "proportion advantage" over F-SOB in the bacterial community; the external location of Z-SOB was then fixed to achieve the "location advantage" over F-SOB in the sludge floc; finally, prior uptake of DO by Z-SOB was ensured to achieve a "sequence advantage" over F-SOB in the substrate utilization. After elimination of filamentous sludge bulking, the dominant SOB in the bacterial community in IC-mode were Thiobacillus, accounting for more than 90% of the population; while dominant SOB in IF-mode were Thiobacillus and Annwoodia, which together accounted for more than 60% of bacteria. These findings are helpful in characterizing biological desulfurization and going forward, should be important in further developing BISURE systems.

Controlling Filamentous Sludge Bulking by Regulating Oxygen Supply in the Start of BISURE System

Mechanisms of Sulfur Selection and Sulfur Secretion in a Biological Sulfide Removal (BISURE) System

Synergistic Effect of Chitosan-Based Sludge Aggregates CS@NGS Inoculum Accelerated the Start-Up of Biofilm Reactor Treating Aquaculture Effluent: Insights into Performance, Microbial Characteristics, and Functional Genes.

Effective Control of Membrane Fouling by Filamentous Bacteria in a Submerged Membrane Bioreactor

Influence of COD/sulfate ratios on the integrated reactor system for simultaneous removal of carbon, sulfur and nitrogen.

Biological short-chain fatty acids (SCFAs) production from waste-activated sludge affected by surfactant.

Promoting Sludge Quantity and Activity Results in High Loading Rates in Anammox UBF.

Characterization and Quantification of Anammox Start-Up in UASB Reactors Seeded with Conventional Activated Sludge

Effect of Nitrate Concentration on Filamentous Bulking under Low Level of Dissolved Oxygen in an Airlift Inner Circular Anoxic-Aerobic Incorporate Reactor.

Roles of sulfite and internal recirculation on organic compound removal and the microbial community structure of a sulfur cycle-driven biological wastewater treatment process

Enhanced Elementary Sulfur Recovery in Integrated Sulfate-Reducing, Sulfur-Producing Rector under Micro-Aerobic Condition

Mechanism and Control of High Sulfide Sludge Bulking

Construction of Sludge Reduction System with In-situ Biological Uncoupling in SBBR

Adding an anaerobic step can rapidly inhibit sludge bulking in SBR reactor

A Biological Strategy for Sulfide Control in Sewers: Removing Sulfide by Sulfur-Oxidizing Bacteria.

Study on a in situ sludge yield reduction SBBR system by biological uncoupling

Inducement Mechanism and Control of Self-Acidification in Elemental Sulfur Fluidizing Bioreactor.

In Situ Excess Sludge Reduction in SBBR Through Uncoupling of Metabolism Induced by Novel Aeration Modes

Granulation of Non-filamentous Bulking Sludge Directed by pH, ORP and DO in an Anaerobic/Aerobic/Anoxic SBR

Enhanced biological phosphorus removal by granular sludge in anaerobic/aerobic/anoxic SBR during start-up period

Study on Microbial Domestication and Quick Startup of Two-sludge System