Design Of Planar Lightwave Circuit-Based Asymmetric Optical Interleaver With Tunable Passband Width

Waiying Chan,Hau Ping Chan,Kaixin Chen

DOI: https://doi.org/10.1109/ICDMA.2010.441

2010-01-01

Abstract:A planar lightwave circuit-based asymmetric optical interleaver with tunable passband width was designed and studied. The simulated spectrum of the device produced 3-dB passband widths of 12.5 and 50 GHz at its two output ports.

What problem does this paper attempt to address?

Optical Interleaver Based on Multicavity Fabry-Perot Thin Film Filter

HX Chen,PF Gu,YG Zhang,HF Li,X Liu

DOI: https://doi.org/10.1117/12.480550

2002-01-01

Abstract:A simple and low-cost solution for interleaver used in optical communication, based on multi-cavity Fabry-Perot optical thin film filters, is presented. The analyses on this kind optical interleaver reveal the influencing factors that would affect the thin film interleaver performance, including the cavity's spacer thickness, ambient temperature variation, dispersion for the refractive index of deposited material depending on wavelength and the numbers of cavity that is important for passband flatness and isolation. The interleaver achieved to 100GHz-spaced channels, at wavelength around C band, with adjacent channel's cross-stalk less than —25dB and the minimum insertion loss nearly 0.4dB or so.
Programmable All-Fiber Structured Waveshaper Based on Linearly Chirped Fiber Bragg Grating and Digital Thermal Controller

Hailiang Zhang,Ming Tang,Yiwei Xie,Huiqi Liao,Songnian Fu,Perry Ping Shum,Deming Liu

DOI: https://doi.org/10.1007/s00340-013-5600-5

2013-01-01

Applied Physics B

Abstract:We proposed and experimentally demonstrated an all-fiber structured programmable optical bandpass filter (waveshaper) based on a linearly chirped fiber Bragg grating and a digital-controlled thermal array. The key parameters of this filter such as the number of transmission channels, passing bandwidth per channel, central wavelength as well as the channel spacing can be reconfigured independently and flexibly by a program-controlled circuit. We have achieved in experiments the tunable passing bandwidth ranging from < 0.04 to 1.55 nm, adjustable central wavelength ranging from 1,547.16 to 1,558.64 nm, and a minimum wavelength spacing of 0.91 nm. The insertion loss of the whole device and the sideband rejection ratio are about 1.76 and 28 dB, respectively.
Design of Interleaver with Cascaded Thin Film Filter

陈海星,顾培夫,李海峰,章岳光,沈伟东

DOI: https://doi.org/10.3321/j.issn:0253-2239.2004.01.014

2004-01-01

Abstract:A novel designing method for optical interleaver based on cascaded solid thin film Fabry-Perot filter is presented. It's easy to control the thickness of the spacer of the device when employing the fused quartz as the material of the spacer, so the thin film interleaver can meet the demand of the narrow wavelength gap for the DWDM system. The analysis on how to ascertain the thickness of the spacer, the numbers of thin film Fabry-Perot filters and the match of the reflective index of each Fabry-Perot filter's mirrors are given. The experimental result is coincident with the designed one well. The device achieves to 100 GHz spaced channels, at wavelength around C band, with adjacent channel's cross-stalk less than -24 dB and the minimum insertion loss nearly 0.4 dB or so.
Novel Triplexer Chip Design Combination of an Asymmetric Y Branch Waveguide and A Multimode Interference

Zichun Le,Bin Li,Jinhua Hu

DOI: https://doi.org/10.4028/www.scientific.net/kem.483.452

2011-01-01

Abstract:A novel triplexer chip based on an asymmetric Y branch waveguide and a multimode interference is presented in this paper. Using the novel triplexer chip, a 1310nm channel is multiplexed and 1490nm and 1550nm channels are demultiplexed for FTTH using. The asymmetric Y branch waveguide is used to separate the 1310nm channel from the 1490nm and 1550nm channels. Then the multimode interference is used to demultiplex the 1490nm from 1550nm channel. The simulated spectra show the bandwidths of three response wavelengths are 100nm, 20nm and 10nm, respectively, which can meet the demand of ITU.984 completely. The isolation for 1310nm is more than 48dB, and the isolation between 1490nm and 1550nm is more than 37dB.
A New Type of Periodically Loaded Half-Mode Substrate Integrated Waveguide and Its Applications

Lin-Sheng Wu,Xi-Lang Zhou,Wen-Yan Yin,Chun-Tian Liu,Liang Zhou,Jun-Fa Mao,Hong-Li Peng

DOI: https://doi.org/10.1109/tmtt.2010.2042832

IF: 4.3

2010-01-01

IEEE Transactions on Microwave Theory and Techniques

Abstract:A new type of half-mode substrate integrated waveguide (SIW) periodically loaded with different lumped elements and structures is proposed in this paper. The propagation constants, Bloch impedances, and voltage distributions of the Floquet TE-modes are all characterized by solving the eigenvalues of the generalized transmission matrix of a single period. Several typical capacitor-loaded, inductor-loaded, corrugated, and electromagnetic-bandgap (EBG)-loaded half-mode SIWs were fabricated to demonstrate their modal dispersion behavior. The measured and simulated S -parameters, group delays, and simulated electric field distributions in these novel structures are presented, with good agreements obtained for all samples. In particular, their unique controllable cutoff frequencies, multiple bandgaps, and separated monomode regions are also illuminated numerically and experimentally. To further show their applications, a tunable phase shifter is developed using a varactor-loaded structure, with its 3-dB bandwidth of 50% and a maximal tunable range of 88°. In addition, a bandpass filter based on EBG-loaded half-mode SIW is also realized and presented with its special characteristics. It demonstrates that the filter has a sharp upper slope side and a good performance of spurious suppression.
Interleaver Design Based on Phase Characteristics of Fabry-Perot Cavity

陈海星,李海峰,顾培夫,刘旭

DOI: https://doi.org/10.3321/j.issn:0253-2239.2003.01.008

2003-01-01

Abstract:A novel method for designing the interleaver applied in DWDM optical communication is presented. This passive component combines the nonlinear phase feature of the reflective beam within F-P cavity and the linear periodic phase characteristic of the beam at certain propagation difference with the frequency. The performance could satisfy the DWDM's requirement when those two phase-matched beams interfered. The theoretic model is simulated using the characteristic matrix of thin film. The result is calculated and analyzed, and the feasibility of this kind of design is demonstrated.
Broadband Polarization-Independent Directional Coupler Using Asymmetric-Waveguides

Qinghuan Xu,Jifang Tao,Chonglei Sun,Jia Zhao,Zuojia Wang,Liuge Du,Xun Li

DOI: https://doi.org/10.1109/jphot.2019.2950572

IF: 2.4

2019-01-01

IEEE Photonics Journal

Abstract:A high-performance broadband polarization-independent directional coupler is designed by using asymmetric-waveguides configuration on a silicon-on-insulator platform. Through the design of cascaded directional couplers, the coupling characteristics of the light with the orthogonally polarized transverse electric (TE) and transverse magnetic (TM) can be manipulated, so that the coupling strength could be equivalent between TE and TM polarizations within an ultra-broadband. Couplers with 50% splitting ratio are designed and simulated for operating in the wavelength range from 1450 nm to 1650 nm for both polarizations. Within the 100 nm wavelength range from 1500 nm to 1600 nm, the deviations of splitting ratio for TE polarization and TM polarization are ±3.3% and ±6.2%, respectively. And within the 200 nm wavelength range from 1450 nm to 1650 nm, the deviations for TE polarization and TM polarization are ±9.0% and ±7.8%, respectively. The footprint of this polarization-independent directional coupler is only 21 μm × 1.6 μm.
Three-port Mode-(De)interleaver in Silicon Waveguide

Weiwei Chen,Pengjun Wang,Jianyi Yang

DOI: https://doi.org/10.1016/j.optlastec.2016.01.016

2016-01-01

Abstract:We propose a three-port silicon mode-(de)interleaver (TSMIL) using an asymmetric multi-arm Y-junction to flexibly address optical modes and efficiently increase the ports with less cascaded stages in mode-division multiplexing transmission. The design criteria developed for multi-port mode-(de)interleaving is presented. The qualitative functionality of the device is mainly determined by the widths of the arms. The example of a six-mode TSMIL is designed and analyzed in detail. Numerical simulations show that a low excess loss (<1dB) and a low mode crosstalk (<−17dB) over a 60nm wavelength range can be obtained.
Design of Narrow Channel Spacing Photonic Wire Awg on Soi with Three Stigmatic Points

Ren Bai,Ao Shen,Yubo Li,Yinlei Hao,Xiaoqing Jiang,Jianyi Yang

DOI: https://doi.org/10.1117/12.869951

2010-01-01

Abstract:In this paper, an accurate Fourier Optics method of designing AWG demultiplexer based on high-index-contract Silicon-on-Insulator (SOI) materials is presented. The typical SOI photonic wire waveguide has a cross section of 400×340nm2 satisfying single-mode condition, and operating central wavelength is 1.5500μm. A three-stigmatic-points method is also applied in order to improve the accuracy, considering the aberration theory. Furthermore, our AWG has another important characteristic--the flat field of the output ports. In the example presented here, we design a 1×256 channel AWG with 0.1-nm channel spacing. The simulation result shows that the insert loss is almost 0dB for the central and peripheral output ports as well, representing a good uniformity. Meanwhile, the crosstalk to the adjacent channel is 14.4dB. Free spectral region (FSR) equals to 30nm as designed.
A Liquid Crystal Tunable Wavelength-Interleaved Isolator with Flat Spectral Response

Zhang-Di Huang,Xi-Kui Hu,Su-Shan Li,Hao Wu,Wei Hu,Xiao Liang,Yan-Qing Lu

DOI: https://doi.org/10.1109/jlt.2010.2070057

IF: 4.7

2010-01-01

Journal of Lightwave Technology

Abstract:A liquid crystal tunable bidirectional isolator is proposed. A wave plate is employed to realize a wavelength interleaving function. If it works as a full wave plate, the corresponding light only may pass along a specific direction while the opposite way is isolated. However, for wavelengths that the light experiences a half wave plate, the isolator's passing direction is reversed. A liquid crystal cell is utilized to tune the isolator so that both the isolated wavelength and direction could be reconfigured. A 100-GHz channel-interleaved tunable bidirectional isolator is demonstrated with 30 dB isolation in both directions. The spectral response at ITU grids are further flattened by using a wave plate stacking technique.
Design of an Ultra-Broadband Silicon Mode (De)multiplexer

Weiwei Chen,Pengjun Wang,Yawei Zhang,Jianyi Yang

DOI: https://doi.org/10.1016/j.optcom.2015.10.066

IF: 2.4

2016-01-01

Optics Communications

Abstract:We propose a low-crosstalk and broadband mode (de)multiplexer. It is designed by cascading mode (de)interleavers utilizing silicon waveguide asymmetric Y-junctions. Asymmetric Y-junctions of each stage are modular. For each asymmetric Y-junction, the even (odd) modes of the stem separated from the odd (even) modes evolve into the low-order modes of the wide (narrow) arm by controlling the widths of the two arms, and vice versa. A four-channel mode (de)multiplexer for TE polarization is analyzed as an example. Simulations show the four-channel mode (de)multiplexer pair has a low crosstalk (<−14.1dB) over a common spectral bandwidth of 280nm.
Compact waveguide devices based on multimode interference by using area modulation method

Xiaoqing Jiang,Haifeng Zhou,Jianyi Yang,Minghua Wang

2006-01-01

Abstract:Based on the overlapping-imaging characteristics of the multimode interference (MMI) and the method of area modulation, this paper presents several compact waveguide devices of MMI structure, such as variable optical attenuator, splitter and spatial optic logic coder. A full shuffle 1 × 3 switch and a three-channel wavelength 3 × 3 router switch with only one compound modulation region are proposed and analyzed. The characteristics of the switch devices have been demonstrated by 2-D BPM simulation. The simulation extinction ratio is higher than 30 dB for 1545, 1550 and 1555 wavelength.
Recent Advances in Photonic Integrated Circuits

Jian-Jun He

DOI: https://doi.org/10.1117/12.691809

2006-01-01

Abstract:Some recent advances in photonic integrated circuits are presented, including an InP-based monolithically integrated optical channel monitor, an arrayed waveguide grating (AWG) triplexer and a novel design of polarization insensitive AWGs. The optical channel monitor comprises a flat-field echelle grating and a slab photodetector array. The channel passband is flattened and widened without loss penalty. The shape of the slab waveguide detectors and the layer structure are optimized to obtain low crosstalk and low polarization dependence. It also has a smaller size due to the elimination of output waveguides. For triplexers in fiber access networks, a cross-order AWG design is proposed to overcome the device layout difficulty due to the wide spectral range of the wavelength channels. The spectral periodicity of the grating is utilized to reduce the free spectral range requirement. Consequently, the AWG can operate at a higher diffraction order with a smaller overall size. Finally, a novel design of a polarization insensitive arrayed waveguide grating is presented. Unlike conventional AWGs where the optical path length difference is obtained only in the arrayed channel waveguides, we design the star coupler regions according to Rowland circle construction with an oblique incidence/diffraction angle. As a result, the optical path length difference is produced in both the channel waveguides and the slab waveguide regions. By using the birefringence difference between the channel waveguide and the slab waveguide, a polarization dispersion compensated AWG is realized without any additional fabrication step.
Electro-optical tunable interleaver in hybrid silicon and lithium niobate thin films

Qingyun Li,Houbin Zhu,Honghu Zhang,Hui Hu

DOI: https://doi.org/10.1364/OE.494532

2023-07-17

Abstract:The interleaver was one of the key devices in dense wavelength division multiplexing (DWDM) applications. In this study, an interleaver with an asymmetrical Mach-Zehnder interferometer structure was designed, fabricated, and characterized in hybrid silicon and lithium niobate thin films (Si-LNOI). The interleaver based on Si-LNOI could be fabricated by mature processing technology of Si photonic, and it was capable of the electro-optical (E-O) tuning function by using the E-O effect of LN. In the range of 1530-1620 nm, the interleaver achieved a channel spacing of 55 GHz and an extinction ratio of 12-28 dB. Due to the large refractive index of Si, the Si loading strip waveguide based on Si-LNOI had a compact optical mode area, which allowed a small electrode gap to improve the E-O modulation efficiency of the interleaver. For an E-O interaction length of 1 mm, the E-O modulation efficiency was 26 pm/V. The interleaver will have potential applications in DWDM systems, optical switches, and filters.
Simulation And Design Of Monolithically Integrated Tunable Wavelength Converter Based On V-Cavity Laser And Delayed Mach-Zehnder Interferometer

Yingchen Wu,Jian-Jun He

2014-01-01

Abstract:In this paper, we present the design and simulation results of a much simpler monolithically integrated wavelength converter based on a V-cavity laser (VCL) and delayed Mach-Zehnder interferometer (DMZI) with semiconductor optical amplifiers (SOAs). The dynamic characteristics of the wavelength converter are investigated using the large-signal dynamic model of semiconductor optical amplifier (SOA) with time-dependent transfer matrix method (TD-TMM). A 10 Gb/s return-to-zero (RZ) tunable all-optical wavelength converter is achieved with a large extinction ratio for both frequency up and down conversions.
Study of All-Fiber Asymmetric Interleaver Based on Mach-Zehnder Interferometer

Lu Huaiwei,Wei Yun,Zhang Baoge,Wu Kaijun,Luo Guanwei

DOI: https://doi.org/10.48550/arXiv.1104.4947

2011-04-26

Abstract:In order to improve the transmission efficiency of optical-fiber communication system with 10Gb/s+40Gb/s, an all-fiber interleaver with unequal passband is proposed and discussed, which is based on a two-stage cascaded Mach-Zehnder interferometer (MZI). The optimum value of structural parameters, such as splitting ratios of the couplers and the physical length differences of the interferometer arms, were chosen. One set of optimized data is validated in the experimental <a class="link-external link-http" href="http://result.The" rel="external noopener nofollow">this http URL</a> experimental results and the theoretic analysis indicate that an all-fiber optical interleaver with -3dB passband width in odd channels and even channels could be obtained, which having more than 60GHz passband and 30GHz passband, for transmission speed of 40Gb/s and 10Gb/s, <a class="link-external link-http" href="http://respectively.By" rel="external noopener nofollow">this http URL</a> assigning different portions of spectrum to the 10Gb/s and the 40 Gb/s channels, the bandwidth efficiency requirement of the 40 Gb/s channel is relieved, and therefore longer transmission distance can be <a class="link-external link-http" href="http://achieved.Comparing" rel="external noopener nofollow">this http URL</a> with the conventional asymmetric interleaver, the most obvious benefit of the proposed interleaver is all-fiber structure.

Optics
An Eight-Channel 400 GHz-Spacing Etched Diffraction Grating Multi/Demultiplexer on a Nanophotonic Silicon-on-Insulator Platform

shen ao,qiu chen,hu ting,xu chao,jiang xiaoqing,li yubo,yang jianyi

DOI: https://doi.org/10.1088/0256-307X/30/8/084204

2013-01-01

Chinese Physics Letters

Abstract:An eight-channel 400 GHz-spacing planar waveguide multi/demultiplexer employing etched diffraction grating is designed and fabricated on a silicon-on-insulator platform with a 220 nm thick top layer. The design parameters are optimized by scalar diffraction simulation to obtain optimal performance with a small footprint of only 0.75 mm(2). A bi-level adiabatic taper is used to connect the input/output waveguide and the slab waveguide so as to reduce the insertion loss and the broadening of the diffraction angle of the propagating light. The device is fabricated in a two-step process with E-beam lithography and dry etching, and the alignment accuracy is 10 nm or even better. Measurements show that the insertion loss is 7.35 dB and the crosstalk between adjacent channels is about -15 dB. Ways to improve the performance are also investigated in detail.
Silicon Photonic O-band (de)multiplexers with Flat-Passband

Nannan Ning,Xiaofei Wang,Qikai Huang,Hui Yu

DOI: https://doi.org/10.1117/12.2600444

2021-01-01

Abstract:Based on cascaded Mach-Zehnder lattice filter, an eight-channel silicon photonic (de-)multiplexer with flat passband is demonstrated in the O-band. The insertion loss of the device is -0.55~-2.48dB and the channel crosstalk is below -7dB. The FSR and channel spacing are about 36nm and 4.4nm respectively.
Silicon-on-Insulator Waveguide Devices for Broadband Mid-Infrared Photonics

Bowei Dong,Xin Guo,Chong Pei Ho,Bo Li,Hong Wang,Chengkuo Lee,Xianshu Luo,Guo-Qiang Lo

DOI: https://doi.org/10.1109/jphot.2017.2692039

IF: 2.4

2017-01-01

IEEE Photonics Journal

Abstract:In this paper, we demonstrate silicon-on-insulator (SOI) channel waveguides with propagation loss and $r$ = 10 $\mu$$\text{m}$ bends with bending loss as low as 2 dB/cm and 0.02 dB/90 $^{\circ }$ in the broad wavelength range of 3.68–3.88 $\mu$ $\text{m}$. We also indicate the limitation of SOI waveguide loss in mid-infrared wavelength by analyzing loss mechanisms. Based on this high-performance mid-infrared waveguide, we systematically analyze the coupling efficiency of various directional couplers, which are critical and commonly used building blocks for on-chip light routing and power splitting. By varying coupling length and sweeping wavelength, the performance of directional coupler with various gap separations is meticulously investigated in 3.68–3.88 $\mu$ $\text{m}$. A experimental database for directional coupler with any power splitting ratio is provided. Our results offer a promising broadband platform for dense wavelength division multiplexing (DWDM) and applications that require precise control of coupling such as racetrack resonator in the mid-infrared region.
Etched-Diffraction-Grating-Based Planar Waveguide Demultiplexer on Silicon-on-Insulator

Wenhui Wang,Yanzhe Tang,Yunxiang Wang,Hongchang Qu,Yaming Wu,Tie Li,Jianyi Yang,Yuelin Wang,Ming Liu

DOI: https://doi.org/10.1023/B:OQEL.0000025795.18597.c8

IF: 3

2004-01-01

Optical and Quantum Electronics

Abstract:An optical wavelength demultiplexer with the etched diffraction grating (EDG) on the silicon-on-insulator (SOI) material is demonstrated. Fabricated by the wet-anisotropic-etching method, 90° turning mirrors are used to bend waveguides, and the size of the EDG-based demultiplexer is minimized to only 16×2.5 mm 2 . The crosstalk is below −16 dB. The on-chip loss is about 9.97 dB, which is composed of about 8.72 dB excess loss and 1.25 dB diffraction loss. The polarization-dependent central wavelength shift is below 0.13 nm, and the polarization-dependent loss is about 0.35 dB. The sources of the crosstalk and loss are discussed in details, and the related measures to improve the performance are also presented.

Design Of Planar Lightwave Circuit-Based Asymmetric Optical Interleaver With Tunable Passband Width

Optical Interleaver Based on Multicavity Fabry-Perot Thin Film Filter

Programmable All-Fiber Structured Waveshaper Based on Linearly Chirped Fiber Bragg Grating and Digital Thermal Controller

Design of Interleaver with Cascaded Thin Film Filter

Novel Triplexer Chip Design Combination of an Asymmetric Y Branch Waveguide and A Multimode Interference

A New Type of Periodically Loaded Half-Mode Substrate Integrated Waveguide and Its Applications

Interleaver Design Based on Phase Characteristics of Fabry-Perot Cavity

Broadband Polarization-Independent Directional Coupler Using Asymmetric-Waveguides

Three-port Mode-(De)interleaver in Silicon Waveguide

Design of Narrow Channel Spacing Photonic Wire Awg on Soi with Three Stigmatic Points

A Liquid Crystal Tunable Wavelength-Interleaved Isolator with Flat Spectral Response

Design of an Ultra-Broadband Silicon Mode (De)multiplexer

Compact waveguide devices based on multimode interference by using area modulation method

Recent Advances in Photonic Integrated Circuits

Electro-optical tunable interleaver in hybrid silicon and lithium niobate thin films

Simulation And Design Of Monolithically Integrated Tunable Wavelength Converter Based On V-Cavity Laser And Delayed Mach-Zehnder Interferometer

Study of All-Fiber Asymmetric Interleaver Based on Mach-Zehnder Interferometer

An Eight-Channel 400 GHz-Spacing Etched Diffraction Grating Multi/Demultiplexer on a Nanophotonic Silicon-on-Insulator Platform

Silicon Photonic O-band (de)multiplexers with Flat-Passband

Silicon-on-Insulator Waveguide Devices for Broadband Mid-Infrared Photonics

Etched-Diffraction-Grating-Based Planar Waveguide Demultiplexer on Silicon-on-Insulator