Phase Field Modeling of Lamellar Eutectic Growth under the Influence of Fluid Flow
Li Feng,Xiao-jing Feng,Yang Lu,Chang-sheng Zhu,Bei-bei Jia
DOI: https://doi.org/10.1016/j.commatsci.2017.05.035
IF: 3.572
2017-01-01
Computational Materials Science
Abstract:Using PF-LBM (phase-field and Lattice-Boltzmann) model, the effects of flow velocity and flow direction on the CBr4-C2Cl6 eutectic lamellar growth morphology in the forced flow are simulated and studied. The results show: the liquid flow direction and flow velocity have significant influence on morphology of eutectic lamellar growth; without liquid flow, the lamellar growth mode is symmetrical growth mode, which is perpendicular to the solid-liquid interface; withflowvelocity u=0.005m/s, when the angle Θ=0° which between the liquid flow direction and the Y direction (parallel to the eutectic lamellar), liquid flow hasn’t effect on eutectic growth morphology; when the angle Θ=45°, thesimulationtime t=20,000Δt, the lamellar growth mode is the mode of oscillation, the β phase nucleation and the α lamellar branching inthefrontof interfaces; when the angle Θ=90°, thesimulationtime t=40,000Δt, the lamellar growth mode is themode of eutectic lamellar spacing oscillation and grows to liquid flow direction, and the interface of the lamellar is not steady, which couples with the β phase nucleation and the α phase branching; when the angle Θ=45°, thesimulationtime t=120,000Δt, the complex growth morphology of eutectic lamellar spacing oscillation, the β phase nucleation and the α phase branching appear inthefrontof interfaces; when the angle Θ=90°, the simulation time t=120,000Δt, the steady growth of the initial oscillation and the growth mode of the β phase nucleation and the α phase lamellar branching (when t=40,000Δt) are maintained; in contrast to the angle Θ=90°, when the angle Θ=45°, the phenomenon of lamellar spacing decreases and lamellar pairs increase earlierappear because of the spacing adjustment. when the angle Θ=90°, with the increase of the flow velocity, the growth velocity of lamellar eutectic is faster, and growth toward the liquid flow direction is more obvious; when flowvelocity u=0.0m/s (without flow field), the lamellar growth morphology is the growth pattern of oscillation and symmetry, which is perpendicular to the solid-liquid interface; when flowvelocity u=0.003–0.005m/s, the lamellar growth morphology is the mixed growth pattern of oscillation and tilting to the liquid flow direction; when flowvelocity u=0.007–0.009m/s, the lamellar growth morphology is the steady mode of lamellar spacing decreases and lamellar pairs increase in the front of interface because of the β phase nucleation. With the increase of flow velocity, the lamellar morphology selection is: eutectic lamellar spacing symmetrical oscillation state, which is perpendicular to the solid-liquid interface→tilt growth and lamellar spacing oscillatory instability→lamellar spacing oscillation the β phase nucleation and the α phase branching in the front of lamellar interface.