Abstract:Matrix acidizing is a technique that is widely used in the petroleum industry to remove scales and create channels in the rock. Removal of scales and creation of channels (wormhole) enhance productivity. Conventional acidizing fluids, such as hydrochloric acid (HCl) for carbonate and a mixture of hydrofluoric acid (HF) and HCl acid, are used for the matrix acidizing process. However, these fluids have some drawbacks, including strong acid strength, corrosion at high temperatures, and quick reactions with scale and particles. Emulsified acid systems (EASs) are used to address these drawbacks. EASs can create deeper and narrower wormholes by reducing the reaction rate of the acid due to the external oil phase. However, EASs have a much higher viscosity compared to conventional acidizing fluids. The high viscosity of EASs leads to a high drag that restricts pumping rates and consumes energy. This study aims to utilize environmentally friendly and widely available nanomaterials as drag-reducing agents (DRAs) of the EAS. The nanomaterials used in this study are carbon nanodots (CNDs). CNDs have unique properties and are used in diverse applications in different industries. The size of these CNDs is usually smaller than 10 nm. CNDs are characterized by their biocompatibility and chemical stability. This study investigates the use of CNDs as DRAs for EAS. Several experiments have been conducted to investigate the CNDs as a DRA for the EAS. The developed EAS was initially tested for conductivity and drop-test analysis to ensure the formation of an inverted emulsion. Thereafter, the thermal stability for the range of temperatures and the rheological properties of the EAS were evaluated to meet the criteria of field operation. Then flow experiments with EASs were conducted before and after adding the CNDs to investigate the efficacy of drag reduction of EASs. The results revealed that CNDs can be used as viscosity reducers for the EAS, where adding the CNDs to the EAS reduces the viscosity at two different HCl concentrations (15 and 20%). It reduces the viscosity of the EAS in the presence of corrosion inhibitors as well as other additives to the EAS, showing its compatibility with the field formulation. The drag reduction was observed at the range of temperatures investigated in the study. The conductivity, stability, and rheology experiments for the sample taken after the flow experiment are consistent, ensuring CNDs work as a DRA. The developed EAS with CNDs is robust in terms of field mixing procedures and thermally stable. The CNDs can be used as a DRA with EAS, which will reduce drag in pipes, increasing pumping rates and saving energy.

Experimental Study on the Characteristics of Weak Corrosive Surfactant Drag Reducer

Effects of Oilfield Injection Water Component on Rheological Characteristics of CTAC/NaSal Aqueous Solution

Synthesis and Performance Evaluation of Multialkylated Aromatic Amide Oligomeric Surfactants as Corrosion Inhibitor/Drag Reducing Agents for Natural Gas Pipeline

Experimental Investigation of the Influence of Surfactant on the Heat Transfer Performance of Pulsating Heat Pipe

Experimental research on drag reduction by polymer additives in a turbulent pipe flow

Investigation of drag reduction by slurry-like drag-reducing agent in microtube flow using response surface methodology (RSM)

Drag reduction and degradation by sodium alginate in turbulent flow

Effect of Shear Flow on Drag Reducer Performance and Its Microscopic Working Mechanism

Study on the Shear Degradation Law of Polymer Drag Reducing Agents

A high salt tolerance and low adsorption drag reducer based on non-covalent enhancement

Study on the Superhydrophilic Modification and Enhanced Corrosion Resistance Method of Aluminum Alloy Distillation Desalination Tubes

On Interfacial Deformation and Resistance Characteristics over Superhydrophobic Surfaces: A Numerical Study

A new temperature-resistant and fast dissolving nano-silica/poly (AM-AMPS) composite drag reducer for slickwater fracturing

Analysis of the Drag Reduction Performance and Rheological Properties of Drag-Reducing Additives

Effects of the Surfactant Solution on the Performance of the Pulsating Heat Pipe

Preparation and properties research of a bifunctional hydrophobic associative polymer drag reduction agent for slick water

An Anti-Corrosion and Drag-Reducing Solvent-Free Coating with Wet Adhesion and Self-Curing Capabilities

Novel Environmentally Friendly Nanomaterials for Drag Reduction of the Emulsified Acid System

Numerical Study on Drag Reduction of Superhydrophobic Surfaces with Conical Microstructures in Laminar Flow

Traces of surfactants can severely limit the drag reduction of superhydrophobic surfaces

Promote or inhibit turbulence drag reduction behavior of surfactant solutions with different micelle structures by certain nanoparticle addition