Abstract:This work focused on the novel symmetrical left-handed split ring resonator metamaterial for terahertz frequency applications. A compact substrate material known as Silicon with a dimension of 5 μm was adopted in this research investigation. Moreover, several parameter studies were investigated, such as clockwise rotation, array and layer structure designs, larger-scale metamaterials, novel design structure comparisons and electric field distribution analysis. Meanwhile, two types of square-shaped metamaterial designs were proposed in this work. The proposed designs exhibit double and single resonance frequencies respectively, likely at 3.32 and 9.24 THz with magnitude values of − 16.43 and − 17.33 for the first design, while the second design exhibits a response at 3.03 THz with a magnitude value of − 19.90. Moreover, the verification of these results by adopting High-frequency Structure Simulator software indicates only slight discrepancies which are less than 5%. Furthermore, the initial response of the proposed designs was successfully altered by simply rotating the design clockwise or even increasing the dimension of the design. For instance, the first resonance frequency is shifted to the lower band when the first proposed design was rotated 90°. On the other hand, by increasing the size of the metamaterial, more than nine resonance frequencies were gained in each symmetric design. Furthermore, the symmetric metamaterial with a similar width and length of 10 μm dimension was adopted for both design structures to construct an equivalent circuit model by utilising Advanced Design System software. Finally, both unit cell designs were utilised to explore the absorption performances which exhibit four and five peak points. Overall, the altering behaviour by changing physical properties and compact design with acceptable responses become one of the novelties of this research investigation. In a nutshell, the proposed designs can be utilised in terahertz frequency which gives optimistic or advantageous feedback and is relatively suitable for the adopted frequency range.

Symmetric Split Ring Resonator with Capacitor Loading for Metamaterial

High Selective Metamaterial Resonator Based on Complementary Split Ring Resonator

Lc Resonance Modulation in Asymmetric Double Split-Ring Resonator Metamaterials

Modulating the Fundamental Inductive-Capacitive Resonance in Asymmetric Double-Split Ring Terahertz Metamaterials

Electric and Magnetic Dipole Couplings in Split Ring Resonator Metamaterials

SRRs?? Artificial Magnetic Metamaterials Modeling Using Transmission Line Theory

Characterization of Metamaterial Slow-Wave Structure Loaded with Complementary Electric Split-Ring Resonators

Multiple Frequency Bands of Square Split Resonant Rings and Metal Wire Metamaterial

Metamaterial via Reconfi guration of Asymmetric Split-Ring Resonators

Field-Circuit Co-Simulation for Microwave Metamaterials with Nonlinear Components

Analysis of Symmetrical, Periodic Negative-Permeability Metamaterial Using Interdigital Capacitance Loading

Magnetic Properties of S-Shaped Split-Ring Resonators

An Ultra-Low Loss Split Ring Resonator by Suppressing the Electric Dipole Moment Approach

Research on SRR Structure Metamaterial Based on Transmission Line Theory

A dual-band metamaterial design using double SRR structures

Dual-Band High-Temperature Superconducting Metamaterial Structure Based On Multimode Split Ring Resonator

Modified Coptic Cross Shaped Split-Ring Resonator Based Negative Permittivity Metamaterial for Quad Band Satellite Applications with High Effective Medium Ratio

Tunable magnetic metamaterial based multi-split-ring resonator (MSRR) using MEMS switch components

High-efficiency Cross-Polarization Conversion Metamaterial Using Spiral Split-Ring Resonators

Symmetric left-handed split ring resonator metamaterial design for terahertz frequency applications

A circuit model for the hybrid resonance modes of paired SRR metamaterials.