Abstract:Near-field high-resolution synthetic aperture radar (SAR) imaging is mostly accompanied by a large number of data acquisition processes, which increases the system complexity and device cost. According to extensive reports, reducing the number of sampling points of a radar in space can greatly reduce the amount of data. However, when spatial sparse sampling is carried out, a ghost normally appears in the imaging results due to the high side lobes generated in the azimuth. To address this issue, a technique is introduced in this paper to recover the blank data through amplitude and phase compensation based on the correlation between sparse array sampling through adjacent points. Firstly, the data sampled by the sparse array is compressed in the range direction to obtain the expected data slices in the same range direction. Then, the blank element of the slice is compensated for with amplitude and phase to obtain full aperture data. Finally, the matched filter method is used to aid in the image reconstruction. The simulation results verified that the method proposed in this paper can effectively reconstruct the image under two kinds of sparse sampling conditions. Thus, a simple single-input single-output (SISO) synthetic aperture radar imaging test bench is established. Compared with the results of a 1 mm (1/4 λ) sampling interval, the quality of the reconstructed image under the condition of a 4 mm (1 λ) sampling interval still stands using our proposed method. Demonstrated by the experiment, the normalized root-mean-square error(NMSE) is 5.75%. Additionally, when the spatial sampling points are sampled randomly with 30% of the full sampling condition, this method can also restore and reconstruct the image with high quality. Due to the decrease of sampling points, the data volume can be reduced, which is beneficial for improving the scanning speed and alleviating the pressure of data transmission for near-field high resolution SAR imaging systems.

Full-polarization synthetic aperture radar hard-in-loop system

Laboratory Experiments for Target Scattering and Imaging Using Fully Polarimetric FMCW Radar System

A New SAR Imaging Method for Sparse Field Traget

PFDIR - a Wideband Photonic-Assisted SAR System

24-Ghz Biomedical Radar on Flexible Substrate for ISAR Imaging

High-resolution W-band ISAR Imaging System Utilizing a Logic-Operation-based Photonic Digital-to-analog Converter

A novel polarimetric FM-CW radar system for laboratory remote sensing experiments

Real-time Implementation of Inverse Synthetic Aperture Radar Imaging Using Field Programmable Gate Array and Digital Signal Processors

A Spaceborne Synthetic Aperture Radar Partial Fixed-Point Imaging System Using a Field- Programmable Gate Array-Application-Specific Integrated Circuit Hybrid Heterogeneous Parallel Acceleration Technique

A Millimeter-wave Forward-looking SAR Imaging Algorithm

Real-Time Spaceborne Synthetic Aperture Radar Float-Point Imaging System Using Optimized Mapping Methodology and a Multi-Node Parallel Accelerating Technique

Active Reconfigurable Intelligent Surface Empowered Synthetic Aperture Radar Imaging

A Novel Vortex Synthetic Aperture Radar Imaging System: Decreasing the Pulse Repetition Frequency Without Increasing the Antenna Aperture

Full-Aperture Processing of Airborne Microwave Photonic SAR Raw Data

High-Resolution Real-Time Imaging Processing for Spaceborne Spotlight SAR With Curved Orbit via Subaperture Coherent Superposition in Image Domain

Photonics-based broadband radar for high-resolution and real-time inverse synthetic aperture imaging

A Frequency Diverse Array SAR Processing Framework Based on the Segmented Phase Code Waveform for HRWS Imaging

Near-Field High-Resolution SAR Imaging with Sparse Sampling Interval

A Hybrid Real/Synthetic Aperture Scheme for Multichannel Radar Forward-Looking Superresolution Imaging

Full Polarization High-Resolution Radar Imaging Based on Multichannel Joint Sparse Recovery