Abstract:Ultrahigh field systems ( ≥ 7 T) can increase the signal-to-noise ratio of magnetic resonance imaging (MRI), improving imaging performance compared to systems with lower fields. However, these enhancements heavily rely on a high B0 magnetic field homogeneity level, which can be achieved through superconducting shimming. This paper presents a novel two-stage superconducting shimming method designed to achieve precise shimming for a 7 T MRI superconducting magnet. In the initial stage, detailed measurements and fittings were conducted to determine the current polarity and the axial or circumferential positions of the shim fields. Subsequently, an optimization strategy was implemented to determine the optimal shim currents with a flexible target field. The second stage involves an iterative process to fine-tune the current of a specific shim coil, identified as having the most significant impact on field homogeneity. The overall fitness of 99.5% underscores the precision in determining the current polarity and position of the shim fields. Significantly, the calibrated shim system substantially improves the peak-to-peak and Root Mean Square Error (RMSE) field homogeneities from 107.42 ppm and 37.00 ppm to 11.12 ppm and 3.26 ppm, respectively, representing improvements of 89.65% and 91.19%. Furthermore, the simulation results of the fine-tuning stage demonstrate additional enhancements in peak-to-peak field homogeneity, to 9.9 ppm by reducing the current of the Z2 shim coil by 51.3 mA. Additionally, the shimmed magnetic field exhibited high time stability, with a maximum variation of only 27 μT observed within 48 h. Thus, the proposed two-stage superconducting shimming framework effectively addresses the challenge of imperfect B0 magnetic fields, enhancing peak-to-peak and RMSE field homogeneity. The stepwise optimized approach also mitigates deviations caused by shim-to-shim coupling, demonstrating its efficacy in achieving precise shimming in ultrahigh-field MRI systems.

Study on the Shimming Power Supply at room temperature for superconducting magnet

Passive Shimming of A Superconducting Magnet Using the L-1-Norm Regularized Least Square Algorithm

The Optimal Target Magnetic Field Method for Passive Shimming in MRI

Apparatus and Experiment of High Temperature Superconducting Magnetic Energy Storage Used for Power System Stability Enhancement

Active shimming for a 25 T NMR superconducting magnet by spectrum convergence method

Implementing a Two-Stage, Shim Field-Calibrated Superconducting Shimming Method on a 7t Cryogen-Free Small Animal MRI Magnet

An Experimental Study on the Passive Shimming in the 0.5 T Superconducting MRI Magnet

Implementing a two-stage, shim field-calibrated superconducting shimming method on a 7 T cryogen-free small animal MRI magnet

A Novel Design Method of Passive Shimming for 0.7-T Biplanar Superconducting MRI Magnet

Research on the method of magnetic field shimming for SC200 superconducting cyclotron

A Novel Passive Shimming Scheme Using Explicit Control of Magnetic Field Qualities with Minimal Use of Ferromagnetic Materials

Research of integrated shimming Halbach magnet for High strength, compact Benchtop NMR device

Design and Analysis of a High Power Supply for the Research System of Superconducting Magnets

THE STUDY ON A PRACTICAL HIGH TEMPERATURE SUPERCONDUCTING MCG SYSTEM

Superconducting Shim Coils Design for the 9.4 T Whole-Body MRI Magnet

Passive Shimming of a 3T Cryogen-Free Animal Magnetic Resonance Imaging Superconducting Magnet with Dense Shim Tray Slots and Small Residual Magnetic Force

On the passive shimming of a 7 T whole‐body MRI superconducting magnet: Implementation with minimized ferromagnetic materials usage and operable magnetic force control

Passive shimming for the 9.4 T whole-body MRI superconducting magnet

Improvement of Magnetic and Cryogenic Energy Preservation Performances in a Feeding-Power-free Superconducting Magnet System for Maglevs

Development Of High Magnetic Field Superconducting Magnet Technology And Applications In China

High-performance Shim Coil Design and Engineering Optimization for Use in an Extremely High Field Superconducting Magnet