Effect and Mechanism of Superplasticizers on Performance of Ultrafine Sulfoaluminate Cement-Based Grouting Materials
Jianwu Zhang,Xiao Wang,Biao Jin,Xiaoting Zhang,Zhixin Li,Xuemao Guan
DOI: https://doi.org/10.1155/2022/3836517
IF: 2.0981
2022-04-16
Advances in Materials Science and Engineering
Abstract:A novel ultrafine sulfoaluminate cement-based grouting material (USCBGM) has been prepared in the previous research, which had better engineering application performance, such as fast setting and hardening, fast strength development, stone body microexpansion, and other properties compared with the traditional ultrafine cement. However, as an ultrafine particle material, it is also necessary to select an appropriate superplasticizer to improve the fluidity of USCGBM paste. Based on this, the effects of polycarboxylic acid (PCE) and naphthalene (FDN) superplasticizers on the performance of USCBGM were studied in this study. The results showed that both PCE and FDN can effectively improve the initial fluidity of USCBGM paste, but the modification effect of PCE was better. The incorporation of PCE had little effect on the setting time of USCBGM paste. Unlike PCE, the addition of FDN can significantly prolong the setting time of paste. XRD, DSC-TG, and SEM results showed the addition of PCE significantly increased the amount of ettringite hydration products in the hardened paste at the early hydration stage. Correspondingly, the hourly strength of hardened paste increased with the addition of PCE. Similar to PCE, the addition of FDN can also promote the formation of more ettringite hydration products at the early hydration stage. However, the difference is that the addition of FDN can lead to the cluster distribution of ettringite crystals, which significantly affected the crystal skeleton effect of ettringite and markedly reduced the early strength of hardened paste.
materials science, multidisciplinary