Abstract:Adaptive arrays have been widely used for interference mitigation in Global Navigation Satellite System (GNSS) receivers. Unlike adaptive nulling, adaptive beam-forming generates a dedicated beam in the antenna pattern towards each individual satellite and form nulls in the interference directions at the same time. Thus, the satellite signals are enhanced while interferences are mitigated, resulting in improved signal-to-interference-plus-noise ratio (SINR). In previous literature mainly two categories of beam-forming mechanisms are recommended, namely the array synthesis method and the so-called "blind" beam-forming method. The array synthesis method calculates the steering vector directly, but needs a cumbersome correction procedure dealing with the non-ideal factors of the antenna array and radio frequency (RF) channels. The blind beam-forming method generates the steering vector on-the-fly using carrier phases collected by auxiliary tracking channels, thus avoids the correction procedure, but has a limited performance against interferences. As an alternative, we proposed a different beam-forming method, which can be regarded as a combination of the two above. This method consists of two steps. In the calibration step, a carrier phase look up table (LUT) is obtained using the live-sky signals. In the beam-forming step, the steering vector is generated by looking up the LUT. This method doesn't need a cumbersome non-ideal factor correction procedure, and has a good anti-interference performance, thus can be a third option for beam-forming.In order to implement and validate this method, a software-defined approach is used. Two real-time software receivers, one for the calibration step and one for the beam-forming step are designed and implemented. In order to meet the real-time requirement, a graphics processing unit (GPU) is used as an accelerator. A batched programming technique is used to fully take advantage of the parallelism offered by the GPU. Software design and programming details are introduced. Experiments are conducted in real environment and results are given. It concludes that this method has a good beam-forming performance in improving C/N-0 and getting more precise positioning results.

Analysis of Multi-beamforming Algorithms for GPS Adaptive Array

NEW ROBUST ADAPTIVE BEAMFORMING METHOD FOR MULTIPATH COHERENT SIGNAL RECEPTION

Analysis of Multi-Antenna GNSS Receiver Performance under Jamming Attacks

A Two-Step Beam-Forming Method Based on Carrier Phases for Gnss Adaptive Array Anti-Jamming

Anti-Jamming Method and Implementation for GNSS Receiver Based on Array Antenna Rotation

Blind Adaptive Beamforming for a Global Navigation Satellite System Array Receiver Based on Direction Lock Loop

Oblique Projection Beamforming GPS Anti-jamming Algorithm

Orientation And Cancellation Of Directional Interfering Signals Based On A Radio Frequency Beamforming Array

The Possibility of Using Power Inversion Adaptive Arrays in High-Precision GNSS Receivers

A Modified Anti-Jamming Method Using Dual-Polarized Ellipsoid Minimum Variance Distortionless Response to Predict the Coverage Ratio of Global Positioning System Signal

Cascaded Multitype Interferences Suppression Method Using Sparse Representation and Array Processing for GNSS Receiver

Robust Adaptive Beamforming for Noncircular Signal Against Array Steering Vector Mismatch and Interference Nonstationarity

Polarization Sensitive Array Beamforming Algorithm for Multipath Mitigation in GNSS

Comparative analysis of two kinds of anti-jamming algorithms based on LCMV

Polyphase Decomposition Based Space Frequency Adaptive Processing in Antenna Array GNSS Receivers

Multi-Beam Forming With Movable-Antenna Array

Block Adaptive Least Mean Square Algorithm for Satellite Multi-beamforming

Improved Least Mean Square Algorithm Based in Satellite Multi-Beamforming

DOA Estimation of GNSS Signals Based on Deconvolved Conventional Beamforming

Robust Wideband Interference Suppression Method for GNSS Array Antenna Receiver via Hybrid Beamforming Technique