Abstract:Adaptive arrays have been widely used for interference mitigation in Global Navigation Satellite System (GNSS) receivers. Unlike adaptive nulling, adaptive beam-forming generates a dedicated beam in the antenna pattern towards each individual satellite and form nulls in the interference directions at the same time. Thus, the satellite signals are enhanced while interferences are mitigated, resulting in improved signal-to-interference-plus-noise ratio (SINR). In previous literature mainly two categories of beam-forming mechanisms are recommended, namely the array synthesis method and the so-called "blind" beam-forming method. The array synthesis method calculates the steering vector directly, but needs a cumbersome correction procedure dealing with the non-ideal factors of the antenna array and radio frequency (RF) channels. The blind beam-forming method generates the steering vector on-the-fly using carrier phases collected by auxiliary tracking channels, thus avoids the correction procedure, but has a limited performance against interferences. As an alternative, we proposed a different beam-forming method, which can be regarded as a combination of the two above. This method consists of two steps. In the calibration step, a carrier phase look up table (LUT) is obtained using the live-sky signals. In the beam-forming step, the steering vector is generated by looking up the LUT. This method doesn't need a cumbersome non-ideal factor correction procedure, and has a good anti-interference performance, thus can be a third option for beam-forming.In order to implement and validate this method, a software-defined approach is used. Two real-time software receivers, one for the calibration step and one for the beam-forming step are designed and implemented. In order to meet the real-time requirement, a graphics processing unit (GPU) is used as an accelerator. A batched programming technique is used to fully take advantage of the parallelism offered by the GPU. Software design and programming details are introduced. Experiments are conducted in real environment and results are given. It concludes that this method has a good beam-forming performance in improving C/N-0 and getting more precise positioning results.

The Possibility of Using Power Inversion Adaptive Arrays in High-Precision GNSS Receivers

A Robust Position Estimation Algorithm for Low-Cost INS/GPS Integrated Navigation System

Effects of Power Inversion Spatial Only Adaptive Array on GNSS Receiver Measurements

Anti-jamming with Adaptive Arrays Utilizing Power Inversion Algorithm

Impact of Element Pattern on the Performance of GNSS Power-Inversion Adaptive Arrays

Anti-Jamming Method and Implementation for GNSS Receiver Based on Array Antenna Rotation

A Novel Power Inversion Antenna Array for the Beidou Navigation Satellite System

A Two-Channel Constrained Power Inversion Algorithm for the Beidou Navigation Satellite System

Anti-Jamming GNSS Antenna Array Receiver with Reduced Phase Distortions Using a Robust Phase Compensation Technique

Polyphase Decomposition Based Space Frequency Adaptive Processing in Antenna Array GNSS Receivers

Robust Wideband Interference Suppression Method for GNSS Array Antenna Receiver via Hybrid Beamforming Technique

Cascaded Multitype Interferences Suppression Method Using Sparse Representation and Array Processing for GNSS Receiver

Distortion‐less carrier phase tracking space‐time adaptive processor based on power inversion criterion for GNSS anti‐jamming receiver

GNSS Spoofing Countermeasure with a Single Rotating Antenna.

A novel adaptive anti-interference algorithm based on negative diagonal loading for spoofing and jamming in Global Navigation Satellite System

Recursive Least Square Anti-Jamming Algorithm and FPGA Implementation for BeiDou Navigation

Adaptive Blind Nulling Without Measurement Biases in GNSS Receivers

A Two-Step Beam-Forming Method Based on Carrier Phases for Gnss Adaptive Array Anti-Jamming

Performance enhancement of a nulling antenna through an architecture of multiplicative array

A Two-Stage Interference Suppression Scheme Based on Antenna Array for GNSS Jamming and Spoofing

Orientation And Cancellation Of Directional Interfering Signals Based On A Radio Frequency Beamforming Array