Abstract:The dc circuit breaker is an indispensable building block for dc network systems. Hybrid circuit breakers that combine mechanical and solid-state switches have more potential to be utilized in dc distribution networks because of their lower conduction losses and fast interrupt speed. The efficient energy dc interrupter with surge protection (EDISON) removes any solid-state circuit in the main current path, thereby substantially reducing the conduction losses during normal operations. However, it requires a dedicated control with fast dynamics because any false triggering of the mechanical switch or solid-state switches of the breaker would lead to a commutation failure and a potential unquenchable arc. This article proposes an FSM-based control scheme that guarantees the accurate and fast control response during a fault event. Due to this fast response requirement, a dual-core-CPU-based control architecture is applied featuring parallel taskings and negligible communication delays between the two cores. Furthermore, a control-law accelerator is employed to further reduce the latency of the program execution by 33. The controller hardware-in-the-loop (CHIL) model of the EDISON breaker is implemented in OPAL-RT to verify the control scheme and derisk the prototype test. A fifth-order RLC network is developed to characterize the mechanical switch behavior such that the hybrid circuit model can be simulated in the CHIL solely by circuit components. Finally, the proposed control scheme is implemented and validated in a prototype test with a 3 kA interrupting current and a 60 A/${mu }$s current commutation rate.

Optimizing The Arcing Time For Smart Circuit Breakers Using Synchronous Phase Control

Electrical Performance Design for Circuit Breakers Based on Multi-domain Sequential Coupling

A Novel Smart High-Voltage Circuit Breaker for Smart Grid Applications

A Novel intelligent high voltage SF6 circuit breaker

Hybrid Mechanical-Static Dc Circuit Breaker And Dc Breaking

Investigation of DC Hybrid Circuit Breaker Based on High-Speed Switch and Arc Generator.

Simulation and Experimental Analysis of Arc Motion Characteristics in Air Circuit Breaker

Simulation study on arc motion process of DC miniature circuit breakers

Study on Influencing Factor of Arcless Breaking in Hybrid Circuit Breaker

Optimization Design of Interruption Characteristics of LVDC Hybrid Circuit Breaker

3-D Transient Finite-Element Analysis and Experimental Investigation of Short-Circuit Dynamic Stability for Air Circuit Breaker

A comparative study of N2 and SF6 arcing process for 252kV puffer circuit breaker based on a novel simulation model

Control Development and Fault Current Commutation Test for the EDISON Hybrid Circuit Breaker

Numerical Research on Switching Arc of Circuit Breaker

Simulation analysis of the 126kV three-break vacuum circuit breaker with phase-control method used in capacitive interrupting

An Arc Squeeze Method for DC Interruption—Experiments and Analysis

Topology, Modeling and Transient Current Transfer Analysis of DC Hybrid Vacuum Circuit Breaker Based on SiC Module

Principle Analysis and Parameter Design of Resonant-Current-Assisted Arcless Soft Switching DC Circuit Breaker

Arc Movement Inside an AC/DC Circuit Breaker Working With a Novel Method of Arc Guiding: Part I—Experiments, Examination, and Analysis

Research of simulation and experiment on arc characteristics of gas mechanical switch

Study of the Long-Time Arcing Characteristics of SF6 in a ±800KV High Speed Switch