Abstract:Abstract Transistors on aligned semiconducting carbon nanotubes (A-CNTs) have been considered a promising substitute for mainstream Si transistors to extend integrated circuit (IC) technology owing to their potential advantages of easy miniaturization and high energy efficiency, but whether A-CNT FETs can be scalably fabricated with ultrascaled whole dimensions while maintaining high performance remains questionable. Here, we explore the whole size scaling down potential of A-CNT transistors and demonstrate the possibility of implementing such small-geometry transistors in ultra-large-scale ICs that consist of billions of transistors. A-CNT transistors with a contacted gate pitch (CGP) of 175 nm have been achieved by simultaneously scaling the gate length and the contact length, and exhibit an on-current of 2.24 mA/μm and a peak transconductance of 1.64 mS/μm, surpassing silicon 45 nm node transistors in terms of both size and electronic performance. A static random-access memory (SRAM) cell has been built using six A-CNT transistors in an area of 0.967 μm2, which is comparable to the commercial silicon 90 nm technology node and is the smallest SRAM cell based on non-Si semiconductors. Furthermore, a full-contact structure is introduced between the metal and A-CNTs to achieve a contact resistance as low as 90 Ω·μm and to reduce the dependence on the contact length. A-CNT transistors downsized to a CGP of 55 nm (corresponding to the silicon 10 nm technology node) have been demonstrated to outperform 10 nm Si MOS transistors in terms of carrier mobility and Fermi velocity, indicating the tremendous potential of A-CNT transistors in high-performance digital ICs of sub 10 nm nodes.

The Partition Algorithm for Interconnect Analysis in Carbon Nanotube Based ASICs

Modeling of Carbon Nanotube Interconnects and Comparative Analysis with Cu Interconnects

Modeling of carbon nanotube (CNT) interconnects

Circuit Modeling and Performance Analysis of Multi-Walled Carbon Nanotube Interconnects

Mini-Review: Modeling and Performance Analysis of Nanocarbon Interconnects

Towards 3-D Carbon-Based Heterogeneous Interconnects

Modeling and Characterization of Carbon-Based Heterogeneous Interconnects for 3-D Ics

Repeater Insertion for Carbon Nanotube Interconnects

Electrothermal Cosimulation of 3-D Carbon-Based Heterogeneous Interconnects

Carbon‐Based Interconnects for RF Nanoelectronics

High-Frequency Analysis of Cu-Carbon Nanotube Composite Through-Silicon Vias

Electrical Modeling of Three-Dimensional Carbon-Based Heterogeneous Interconnects

Carbon Nanotube Vias: A Reality Check

Performance analysis of multi-walled carbon nanotube based interconnects

Carbon Nanotube Vias: Does Ballistic Electron–Phonon Transport Imply Improved Performance and Reliability?

Crosstalk Prediction of Single- and Double-Walled Carbon-Nanotube (SWCNT/DWCNT) Bundle Interconnects

Circuit Modeling and Time Delay Analysis of Double-Walled Carbon Nanotube Interconnects

Aligned carbon nanotube integrated circuit downsizing toward a sub-10 nm node

Towards Future VLSI Interconnects Using Aligned Carbon Nanotubes

A Novel Algorithm for Circuit Partitioning at Transistor Level

Recent Progress and Challenges Regarding Carbon Nanotube On-Chip Interconnects