Abstract:In this investigation, the welding quality of TC2 titanium alloy with 0.4 mm thickness was predicted using two regression models and an artificial neural network model. The welding current and the voltage between the upper and lower electrodes were obtained using the Rogowski coil and a line voltage sensor. And then the variations of the dynamic resistance curve and the effects of the welding current and welding time on the dynamic resistance signals were investigated. The principal component analysis (PCA) was employed to eliminate the redundant information in the dynamic resistance curve and characterize the shape information of the entire dynamic resistance. A linear regression model quantifying the relationship between the nugget diameter and the principal components was established. The results of the analysis of variance indicated that the performance of this regression equation was very good. Some statistical characteristics of the dynamic resistance signal were also extracted to investigate the relationship between the nugget diameter and dynamic resistance. The results indicated that the regression model established based on the PCA technique was much more robust than the model developed on the basis of the features manually extracted from the dynamic resistance signal. The neural network model was also used to predict the nugget diameter of the welding joints utilizing the extracted features. The performances of the three established prediction models were compared and their behavioral discrepancies were also investigated. The PCA technique not only can minimize the prior assumptions about the certain shape of the dynamic resistance curve and remove the subjective factors caused by the manual extraction method, but it also can assess and monitor the welding quality with a good level of reliability.

Prediction of Tensile Property of TIG Welding Joints in GH99 Alloy by Artificial Neural Network

Prediction of Tensile Properties in Inconel 625 Superalloy Fabricated by Wire Arc Additive Manufacturing Using Improved Artificial Neural Network

Strength Prediction of Aluminum–Stainless Steel-Pulsed TIG Welding–Brazing Joints with RSM and ANN

Prediction of Tensile Property of Hydrogenated Ti600 Titanium Alloy Using Artificial Neural Network

Prediction of welding residual stress and deformation in electro-gas welding using artificial neural network

Artificial Neural Network Modelling to Predict Hot Deformation Behaviour of As Hiped Fgh4169 Superalloy

Prediction of Mechanical Properties of A 357 Alloy Using Artificial Neural Network

Prediction and Optimization of Tensile Properties of 2219-T8 Aluminum Alloy TIG Welding Joint by Machine Learning

Predicting Effects of Diffusion Welding Parameters on Welded Joint Properties by Artificial Neural Network

Prediction and fitting of weld morphology of Al alloy-CFRP welding-rivet hybrid bonding joint based on GA-BP neural network

Artificial neural networks application to predict the ultimate tensile strength of X70 pipeline steels

Simulating Weld Hot Crack of T-Type Joints of Aluminum Plates with Ann

Artifical Neural Metwork Model for the Prediction of Mechanical Properties of Ti-10v-2fe-3al Titanium Alloy

Artificial neural network model for the prediction of mechanical properties of hydrogenated TC21 titanium alloy

Prediction of Laser-TIG Weld Profile Based on Neural Network and Intelligent Detection

Prediction of gas metal arc welding parameters based on artificial neural networks

Online tensile strength prediction considering geometric and physical characteristics during FSW 2219-T8 aluminum alloy plate

Neural Network Between Impact Ductility of Girth Joint of X70 Pipeline Steel and Welding Parameter

Prediction of High Cycle Fatigue Property of Ti-6Al-4V Alloy Using Artificial Neural Network

Welding Quality Evaluation of Resistance Spot Welding Based on a Hybrid Approach

Accurate Prediction of the Extrusion Forming Bonding Reliability for Heterogeneous Welded Sheets Based on GA-BP Neural Network