Abstract:The three welding modes of laser positioning, trajectory fitting and real-time tracking are key links for flexible robotic welding, because they directly affect the adaptability of welding robots for complex structural parts. Nevertheless, there are few studies on the integration of laser positioning, trajectory fitting and real-time tracking welding. Aiming at the drawback of that the robot cannot efficiently match the corresponding welding process between different working conditions such as short seam, spatial curve seam and long seam welding, a control scheme that can integrate the above three welding modes is proposed in this paper. First, the welding requirements of laser positioning, trajectory fitting and real-time tracking are transformed into a unified 3D coordinate recognition task for integrated welding, so the identification of welding points under three different processes can be obtained through an identical inference. The next, given the fast inference speed of YOLOv5, a joint ROI extraction algorithm with YOLOv5 as the core is applied. To compensate for YOLOv5′s inability to directly locate seam centers, iterative centerline unbiased detector (ICUD) and adaptive feature extraction algorithm (AFEA) are proposed without the need for complex image pre-processing and with very strong immunity to strong exposure and strong arc spatter. Finally, teaching trajectory correction model, B-spline curve fitting model, and 3D coordinate real-time tracking model are presented to enhance the adaptability of the welding robot and to flexibly match the appropriate welding mode in various working conditions. Experimental results indicate that the welding trajectory is basically consistent with the seam centerline when laser positioning and trajectory fitting welding. In real-time tracking welding, the real-time deviation is mainly controlled within the range of ± 0.2 mm, and the average error is 0.1160 mm.

3D reconstruction of worn parts for flexible remanufacture based on robotic arc welding

Worn area modeling for automating the repair of turbine blades

Remanufacturing Shaping System Based on Pulsed Plasma Arc Welding

3D reconstruction of complex spatial weld seam for autonomous welding by laser structured light scanning

BROKEN AREA MODELING FOR REPAIR AUTOMATION

3D Reconstruction of High Reflective Welding Surface Based on Binocular Structured Light Stereo Vision

Point Cloud 3D Weldment Reconstruction and Welding Feature Extraction for Robotic Multi-bead Arc Weld Cladding Path Plaanning

A 3D reconstruction method based on grid laser and gray scale photo for visual inspection of welds

Weld-seam identification and model reconstruction of remanufacturing blade based on three-dimensional vision

A real-time seam tracking system based on extraction and restoration model in robotic GMAW

On-Line 3D Reconstruction Based on Laser Scanning for Robot Machining of Large Complex Components

A Feature Matching Algorithm Applied to Welding Trajectory Revising

A 3D Vision-Based Weld Seam Extraction Method for Arbitrarily Placed Spatial Planar Weldments

Research on Welding Guidance System of Intelligent Perception for Steel Weldment

Automatic 3D Seam Extraction Method for Welding Robot Based on Monocular Structured Light

A novel system for off-line 3D seam extraction and path planning based on point cloud segmentation for arc welding robot

Intelligent Perception and Seam Tracking System for Thick Plate Weldments Based on Constant-Focus Optical Path

Versatile robotic welding system integrating laser positioning, trajectory fitting and real-time tracking

Structured light welding seam tracing system based on wheel-pedrail robot

A Novel 3-D Path Extraction Method for Arc Welding Robot Based on Stereo Structured Light Sensor

Feature extraction and robot path planning method in 3D vision-guided welding for multi-blade wheel structures