Abstract:Low-voltage clock generation and modulation are important to have dynamic voltage scaling for low-power SoC design or to enable the chip to be directly powered by energy harvesters for IoT applications. Even though the supply voltage of an integer-N PLL has reached 0.4V [1], designing a robust fractional-N PLL under 0.5V is still challenging as both a high-performance phase detector (PD) and an effective ΔΣ quantization noise (Q-noise) reduction method are required at low voltage. As shown at the top of Fig. 14.7.1, the time resolution of a DTC is severely degraded as supply voltage decreases, and the use of a circuit’s intrinsic time delay as reference base is not stable over PVT variations. Even though voltage-domain compensation methods [2, 3] achieve lower noise and better linearity, they must first convert the phase error from the time domain to the voltage domain, which causes nonlinearity issues and consumes significant voltage headroom for ultra-low-voltage (ULV) operations. To the best of authors’ knowledge, the lowest supply voltage for a published fractional-N PLL is 0.5V, but it uses an on-chip voltage booster to supply a higher internal voltage for the TDC [4] or must use large decoupling capacitors for the TDC in product-level designs. Given the fact that the use of a large decoupling capacitor with supply regulation is required in practice to achieve robust in-band noise performance, a time-interleaving flip-flop phase detector (TI-FFPD) has been proposed as an efficient PD structure, which achieves high linearity and low reference spur for a ring-VCO-based integer-N PLL [5]. By leveraging the advantage of the TI-FFPD, this paper presents a sub-0.5V bias-current-free fractional-N PLL with a calibration-free voltage-mode phase interpolator (VPI) for Q-noise cancellation, achieving sub-600fs rms jitter and <-57dBc worse-case fractional spur at 2.4GHz output.

Low-noise Fractional-N PLL Design with Mixed-Mode Triple-Input LC VCO in 65nm CMOS

Optimized System Design for Fully Integrated Fractional-N Pll

A Low Power Sub-GHz PLL with Optimized Class-C Voltage-controlled Oscillator

A 0.8 V Low Power Low Phase-Noise Pll

An Improved Low Phase Noise LC-VCO with Wide Frequency Tuning Range Used in CPPLL

A Low Phase Noise V-Band 40 Nm Cmos Phase Locked Loop For Wireless Communication

A Low Power Sub-GHz PLL with Optimized LO Distribution Circuit

A Continuously Tunable Hybrid LC-VCO PLL With Mixed-Mode Dual-Path Control and Bi-levelModulated Coarse Tuning

A Continuously Tunable Hybrid Lc-Vco Pll with Mixed-Mode Dual-Path Control and Bi-Level Delta-Sigma Modulated Coarse Tuning

A 65nm CMOS 3.6GHz fractional-N PLL with 5th-order ΔΣ modulation and weighted FIR filtering

A low-noise, 0.05–17.8-GHz fractional-N phase-locked loop with two parallel synchronized dual-core voltage-controlled oscillators

A 65nm Cmos 3.6ghz Fractional-N Pll With 5(Th)-Order Delta Sigma Modulation And Weighted Fir Filtering

A 4.7ghz Synchronized-Multi-Reference PLL with In-Band Phase Noise Lower Than Reference Phase $\text{noise +20}\Text{logn}_{\mathrm{d}\mathrm{i}\mathrm{v}}$

A Low Phase-Noise LC Voltage Controlled Oscillator in CMOS Technology

An Ultra-Low-Voltage High-Performance VCO in 0.13 μm CMOS

A 68.1-to-73.8ghz E-band Low Phase Noise QPLL with Amplifier Feedback QVCO in 65-Nm CMOS

A Compact, Low-Power, and Low-Jitter Fractional-N Phase-Locked Loop with a Single-Ended Ring Voltage-Controlled Oscillator in a 12 Nm CMOS FinFET

A 3.3-4.5GHz Fractional-N Sampling PLL with A Merged Constant Slope DTC and Sampling PD in 40nm CMOS

A K-Band Fractional-N Frequency Synthesizer with a Low Phase Noise LC VCO in 90nm CMOS.

A Low-Spur Current-Biasing-Free Fractional-N Hybrid PLL for Low-Voltage Clock Generation

14.7 A 0.45V 0.72mw 2.4ghz Bias-Current-Free Fractional-N Hybrid PLL Using a Voltage-Mode Phase Interpolator in 28nm CMOS