Abstract:This article proposes an improved analytical model of slotted linear permanent magnet synchronous machines (LPMSMs) to fast and accurately obtain the magnetic field distribution and detent force. Considering the secondary end effect can optimize the thrust performance in terms of machine control, while there are few research works focusing on this study. Combined with the periodic extension method, both the primary and secondary end effects are taken into consideration, which is the major contribution of this article. The analytical model containing seven subdomains (SDs) is conducted in Cartesian coordinates. The magnetic distributions in air-gap, slots, and end regions are obtained by solving Maxwell equations with various interface conditions. The thrust and normal forces are subsequently calculated based on the Maxwell stress tensor. The corresponding finite element (FE) model produces numerical results to validate the analytical results. A prototype is manufactured and tested. The experimental results show that the improved analytical model is accurate and efficient in no-load performance calculation. The investigation shows that this proposed method can be applied to all of the LPMSMs with similar structures.

Compensation Methods of Longitudinal End Effects in Permanent-magnet Linear Synchronous Motor

An Accurate No-Load Analytical Model of Flat Linear Permanent Magnet Synchronous Machine Accounting for End Effects

Solution of Permanent Magnet Synchronous Motors with Partition between Poles Halbach Magnet

Performance Analysis of Asymmetric-Excited Flux Reversal Permanent Magnet Linear Machines

Magnetic Circuit Modeling of Dual-Armature Flux-Switching Permanent Magnet Machine

Analysis and Reduction of Detent Force in Permanent Magnet Linear Synchronous Motor

Detent Force Analysis and Optimization of Permanent Magnet Linear Synchronous Motor

A Nonlinear 3-D Hybrid Model for Surface-Mounted Permanent Magnet Machines Considering End Effect

FEM Analysis and Application of Saturation Effect PMLSM Winding Inductance

Detent-Force Analysis and Reduction of Modular Permanent-Magnet Linear Synchronous Motors with Non-overlapping Windings

Analytical Model of Permanent Magnet Linear Synchronous Machines Considering End Effect and Slotting Effect

Comparative Investigation Of Single-Sided And Double-Sided Permanent Magnet Linear Motor

Nonlinear Analytical Analysis of External Rotor Permanent Magnet Synchronous Motor

Thrust Ripple Optimization and Experiment for a Permanent Magnet Linear Synchronous Motor

A New Method for Reduction of Detent Force in Permanent Magnet Flux-Switching Linear Motors

Analytical Model of Electromagnetic Performance for Permanent-Magnet Vernier Machines Using Nonlinear Exact Conformal Model

Nonlinear Analytical Model-Embedded Optimal Design for ER-PMSM

Analysis and Elimination of the Off-Set Flux Density in the Sectionally Powered AC Linear Motors

Hybrid Analytical Model for Predicting the Electromagnetic Losses in Surface-Mounted Permanent-Magnet Motors

Design and Analysis of a Transverse-flux Permanent Magnet Motor With Hybrid Iron-core

Analysis of the end-effects in double stator linear-rotary permanent magnet motor with long mover