Abstract:In order to complete the defect inspection and welding performance evaluation of the ultra-thick-walled aluminum alloy welded joint by electron beam welding (EBW), the ultrasonic time of flight diffraction (TOFD) D-scan imaging inspection investigations were carried out for the welded joint with the thickness of 165mm. Aiming at accurately identifying the defect information in the whole thickness area of the weld joint, a multiple scanning method combined with the double surface inspection with different separations of transducers and different refraction angle of acoustic beam was proposed to make the main beam of the transmitted and received transducers cover the whole weld zone. The experiments with different inspection parameters were performed by the top and bottom surface scanning for the four artificial side-drilled holes (SDHs) in different depth. The testing results of A-surface and B-surface scanning with the separation of 160mm and the refracted angle of 45° show that the defects in the depth more than 20mm can be accurately sized and positioned, while that in the depth less than 20mm at the vicinity of top surface are in the inspection blind zone. However, the defect diffracted waves are distinguished from the lateral waves obviously in the A-surface scanning with the separation of 72mm and the refracted angle of 68°. Large numbers of welding defects in the middle depth area and two sides of the weld zone can be observed by D-scan image. It is shown that the novel scanning method can effectively improve the inspection difficulties of ultra-thick-wall aluminum alloy weld and its inspection blind zone.

Defect detection in brazed weldment with lattice structure using ultrasonic Lamb wave technique

Defect detection in brazed weldment with lattice structure using acoustic shadow technique

Detecting features of defect metal based on laser ultrasonic technique

Finite element simulation of laser-generated ultrasonic waves for quantitative detection of internal defects in welds

Weld Quality Inspection of Small-Diameter Thin-Walled Pipes by a Laser Ultrasonic Method.

Ultrasonic nondestructive testing of braze defects

Auto Ultrasonic Testing of the Micro Defects Close to the Surface in the T-Shaped Laser Welding Joint

Analysis on Ultrasonic TOFD Imaging Testing for Ultra-thick-walled EBW Joint of Aluminum Alloy

Research on Detection of Small Defects of Aluminum Plates Based on Electromagnetic Ultrasonic Lamb Wave

Defect Detection by Ultrasonic Guided Wave for A Steel Wire in the Anchorage Zones

Ultrasonic nondestructive evaluation of electron beam weld with complex structure

Application of laser ultrasonic technique for detecting weld defect based on FDST method

Numerical study on response characteristics of S0Lamb waves to groove defects in welded thin plates

Electromagnetic Acoustic Detection of Pipe Defects Hidden above T-Type Support Structures with Circumferential Shear Horizontal Guided Wave

Ultrasonic Inspection and Defect Identification of Thin - Walled Stainless Steel Welded Pipe Weld

Guided wave-based crack detection in U-shaped flexural plate butt welds

Weld Crack Testing Method Using Ultrasonic Tofd Technique

Lamb Wave Line Sensing For Crack Detection In A Welded Stiffener

Guided Wave and Probability Based Diagnostic Imaging for Detection of Multiple Welding Damages in Welded Tubular Steel Structures

Laser ultrasonic detection for defects of LAM components based on variable time window intensity mapping with adaptive 2σ thresholds

Longitudinal Wave Defect Detection Technology Based on Ablation Mechanism