Numerical study on response characteristics of S0Lamb waves to groove defects in welded thin plates

Haichao ZHENG,Xinjie ZHU,Guangjian GAO,Mingxi DENG

DOI: https://doi.org/10.11684/j.issn.1000-310X.2018.01.020

IF: 3.614

2018-01-01

Applied Acoustics

Abstract:The response characteristics of the S0Lamb wave propagation to the groove defects,as well as the influences of the weld joint on the detection sensitivity of the S0Lamb wave to the groove defects, have been investigated using numerical simulations. The simulation results show that the reflection ratio of the S0_R signal (i.e. the echo signal of the S0Lamb wave reflected by the groove defect) monotonously increases with increase in the depth of the groove defects. However,the change trend of the reflection ratio of the S0_Rsignal is no longer monotonic with change in the width of the groove defects. It is proposed that the width of the groove defects can be evaluated via simultaneously considering both the reflected ratio of the S0_Rsignal and its duration. It is found that the detection sensitivity of the S0Lamb wave to the groove defects decreases with increase in the weld reinforcement. In contrast, the detection sensitivity of the S0Lamb wave to the groove defects is found to be slightly influenced by the width of the weld joint. The weld reinforcement is a main factor that obviously affects the detection sensitivity of the S0Lamb wave to the groove defects. The simulation results show that it is feasible to use the S0Lamb wave to detect the groove defects hidden behind the weld joint. The results concluded in this paper lay a basis for further development of ultrasonic Lamb wave nondestructive testing technique for welded plate structures.