Abstract:Broadband operation is of great importance for the applications of travelling wave tubes such as high-data communication and wideband radar. An input/output (I/O) structure operating with broadband property plays a significant role to achieve these applications. In this paper, a Y-type branch waveguide (YTBW) coupler and its improvements are proposed and utilized to construct an extremely wideband I/O structure to ensure the broadband operation for sheet beam travelling wave tubes (SB-TWTs). Cascaded reflection resonators are utilized to improve the isolation characteristic and transmission efficiency. Furthermore, to minimize the reflectivity of the port connected with the RF circuit, wave-absorbing material (WAM) is loaded in the resonator. Simulation results for the YTBW loaded with WAM predict an excellent performance with a 50.2% relative bandwidth for port reflectivity under -15 dB, transmission up to -1.5 dB, and meanwhile isolation under -20 dB. In addition, the coupler has a relatively compact configuration and the beam tunnel can be widened, which is beneficial for the propagation of the electrons. A Q-band YTBW loaded with two reflection resonators is fabricated and microwave tested. Vector network analyzer (VNA) measured results have an excellent agreement with our simulation, which verify our theoretical analysis and simulation calculation.

16.5: The suppression of BWO power holes in the TWTs using the helix pitch taper method

The Small Signal Theory Analysis and Optimization Design of High Efficiency Broadband TWTs

Planar Contra-Wound Helix for Application in TWTs with Reduced Backward-Wave Oscillation

Investigation on Out-of-Tube Reflection Oscillations and Suppression Technology for Wideband Sheet Beam TWTs

Study on the Increased Threshold Current in the Development of 220-Ghz Folded Waveguide Backward-Wave Oscillator

Simulation and Experiment of High Efficiency Slow Wave Structure of a 26.5-40GHz Helix-TWT

A Staggered Vane-Shaped Slot-Line Slow-Wave Structure for W-Band Dual-Sheet Electron-Beam-Traveling Wave Tubes

Optimization Of The Watt-Scale 220-Ghz Folded Waveguide Bwo

Design and microwave test of an ultrawideband input/output structure for sheet beam travelling wave tubes

Analysis and Design of Novel Contrawound Helix Slow-Wave System

Experimental Study of A High-Power Backward-Wave Oscillator Operating Far from the Upper Cutoff

A Novel Non-quasi-2D Slow-wave Structure for THz Sheet Beam TWTs

Investigation of High Interaction Efficiency of Sheet Beam TWT Based on All-Period Optimization and Beam Bunching Analysis

A wideband planar helix slow-wave structure for millimeter-wave TWTs

A High-Power Sheet Beam Slow-Wave Structure of Traveling Wave Tubes

Resonant Enhancement of Radiation from a Backward Wave Oscillator Utilizing Large Diameter Corrugated Metal Structure

Simulation of Backward-Wave Oscillation in Helix Traveling Wave Tube under Permanent Periodic Magnetic Focusing

Design and RF Characterization of the Co-Planar Slow Wave Structure for Millimeter-Wave BWO Applications

Backward Wave Oscillator Using a Planar Helix Slow-Wave Structure with Straight-Edge Connections

Performance Evaluation and Experimental Study of a 0.34-THz Folded Waveguide Sheet Beam BWO

Development of an E-Band CW Space TWT With Substantial Improvement in Performance