Abstract:The wear of oil pump vanes easily leads to the noise and vibration, even results the decrease of volume efficiency and total efficiency. In order to reduce the friction and improve the lubrication between the vane and the pump inner wall, the micro-machining of micro-structure on the oil pump vanes is proposed. First, the micro-V-grooves with the depth ranging from 500 mu m to 50 mu m were micro-grinding on the top of the vanes by a diamond grinding wheel. Secondly, the experiments were conducted to test the actual flow rate, the output power and the overall efficiency of the oil pump with and without the micro-groove vanes. Then, the computational fluid dynamics (CFD) method was adopted to simulate the pump internal flow field. Finally, the micro-flow field between the internal wall of the oil pump and the top of micro-grooved vanes was analyzed. The results shows that the pump overall efficiency increased as the decrease of micro-groove depth from 500 mu m to 50 mu m and not be affected by the rotate speed and working frequency of the pump rotator. Especially the micro-groove with depth of 50 mu m, the actual flow rate, the output power and the overall efficiency reached to the maximum. From CFD simulation, the velocity of the micro-flow between the surfaces of the vane and inner wall was larger than the pump linear velocity when the microstructure depth is larger than 50 mu m, leading to an internal leakage. When the micro-groove depth is between 10-50 mu m, the velocity of the micro-flow was less than the pump linear velocity and no internal leakage was found, but the oil film thickness is too small to be beneficial to lubrication according to the fluid dynamic characteristics. Thus, for the oil pump equipping with micro-grooved vane with the depth of 50 mu m, the internal leakage not only is avoided but the lubrication efficiency is improved and the oil pump efficiency is also enhanced.

Design and Research of a Type of Durable Micropore Oil Feeding System

Numerical Analysis of Lubrication Property for Port Plate Pair of Axial Piston Pump

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Development of Experiment Rig for Lubricate Film of the Slipper-pad in Axial Piston Pumps

Development And Simulation Of Lubrication Test System For Port Plate/Cylinder Block In Axial Piston Pump

Experimental and Numerical Analysis of a Self-Circulating Oil Bearing System for Gear Pumps

Research on Micron Electrohydraulic Position Feedback Control System

Experimental Analysis On Oil Film Properties Of Plane Port Pair In Axial Piston Machine

Investigations of the Micro Surface Shape for the Gear-Shaft/journal-bearing Interface in Water Hydraulic Internal Gear Pumps

The Mechanism Performance of Improved Oil Pump with Micro-Structured Vanes

Optimization Design Of The Inner Radius Of The Sealing Surface Of Slipper

Investigation on the Radial Micro-Motion about Piston of Axial Piston Pump

Online monitoring of oil film thickness of journal bearing in aviation fuel gear pump

Design and Optimization of Self-Compensation Oil Distributor for Hydraulic Motors

Design and Experiment of Oil Lubricated Five-Leaf Foil Bearing Test-Bed

Study on the Performance of a Designed Annular Piezoelectric Microjet for Active Lubrication of Space Bearing

Research on the Injection Performance of a Novel Lubricating Device Based on Piezoelectric Micro-Jet Technology

A Novel Bearing Lubricating Device Based on the Piezoelectric Micro-Jet

Study on the influence of key design parameters on lubrication characteristics of a novel gear system applying Taguchi method

Design and application on experimental platform for high-speed bearing with grease lubrication

A Trace Redundant Lubrication Piezoelectric Microjet for Bearing System