Abstract:This paper studies the fatigue behavior of high-strength basalt fiber-reinforced polymer (BFRP) tendons for potential applications in prestressed structures. An effective anchoring method of winding fiber sheets was first developed for fatigue testing of BFRP tendons to avoid premature failure at the anchorage. The fatigue stress ranges from 0.05 to 0.14f(u) (f(u) = ultimate tensile strength) and maximum stresses from 0.6 to 0.8f(u) were determined, whereas the elastic modulus of BFRP tendons during the fatigue tests was measured. The fatigue failure mechanism was analyzed and elaborated at both the macro-and microscopic levels. The appropriate fatigue stress range and maximum stress level were predicted from both experimental fitting and reliability analysis. The results show that the fatigue failure of a BFRP tendon is mainly induced by the debonding among fiber-matrix interfaces at the outer layer of the tendon. The fatigue stress range greatly affects the fatigue life of BFRP tendons. The BFRP tendons can sustain 2 million cyclic loadings under a stress range of 0.05f(u) (85 MPa) and maximum stress of 0.6f(u) (1,018 MPa). Furthermore, the elastic modulus of BFRP tendons before failure remains constant regardless of the number of cycles. Prediction of fatigue strength (limit of stress range and maximum stress to sustain 2 million cyclic loadings) based on experimental fitting shows a satisfactory consistency with the previously mentioned experimental results (0.05 and 0.6f(u)). A recommendation of a stress range of 0.04f(u) (68 MPa) and maximum stress of 0.53f(u) (899 MPa) are proposed with 95% reliability for BFRP tendons in prestressing applications. (C) 2015 American Society of Civil Engineers.

Resarch on the Ultimate Stress of Unbonded Prestressed FRP Tendons

Research of prestressed FRP in the reinforcement of timber beams

The Ultimate Strength of External Pre-stressed Concrete Beam with FRP Tendons

EXPERIMENTAL STUDY ON FLEXURAL BEHAVIOR OF REINFORCED CONCRETE BEAMS PRE-STRESSED WITH CFRP TENDONS

Research on Ultimate Stress Increment in CFRP Tendons for Simply Supported Beams and Slabs

Ultimate Strength Analysis for Reinforced Concrete Beams with External Prestressed FRP Tendon

Estimation of Ultimate Stress in External FRP Tendons

Research on ultimate stress increment in unbonded CFRP tendons for continuous beams and slabs

Research on Stress Increase of Unbonded Tendons at Ultimate in Prestressed Concrete Continuous Beams

ULTIMATE STRESS IN EXTERNAL TENDONS:PROPOSED METHOD AND TESTING VERIFICATION

Experimental Evaluation of Bent FRP Tendons for Strengthening by External Prestressing

Prediction of Ultimate Stress in Unbonded Prestressed Tendons

Stress of Carbon Fiber Reinforced Polymer Tendons in Prestressed Simply Supported Beams

Mechanics Performance of FRP Tendons Used in Engineering Structure

Experimental studies on shear behavior of concrete beams prestressed with CFRP tendons

Fatigue Behavior of Basalt Fiber-Reinforced Polymer Tendons for Prestressing Applications

Research on Reasonable Position of FRP Tendons in Concrete Beams Prestressed with Bonded And/or Unbonded FRP Tendons

Progress in Studies on Flexural Behaviors of Concrete Beams Prestressed with FRP Tendons

PROGRESS IN STUDIES ON BEHAVIORS OF CONCRETE BEAMS PRESTRESSED WITH FRP TENDONS

Ultimate Stress of Unbonded Prestressed Tendons

Effects of pretension loads on bending behaviors of CFRP tendons