Abstract:This paper addresses the measurement and modelling of the damaged properties of asphalt mixtures including the fracture, healing and viscoplastic deformation of the asphalt mixtures in both tensile and compressive loading as being affected by their composition and conditioning with ageing and exposure to temperature and moisture. An energy-based mechanics is applied to obtain the material fundamental properties such as surface energies, bond energies, anisotropy, yield functions and plastic potential functions that are valid for actual asphalt mixtures, viscoelastic crack growth criteria under both tensile and compressive loading, a simple mechanics-based method of determining the fatigue endurance limit, and the measurement and prediction of healing in restoring the damage done by fracture. Healing is anti-fracture and cracking is the net result of the interplay of these two complimentary mechanisms. Because fracture in asphalt mixtures is not the growth of a single crack but the simultaneous growth of multiple cracks that start out as air voids, this fact leads to the use of the growth of damage density to characterise fracture in an asphalt mixture. It was discovered that the form of Paris' law applies to the growth of damage density of asphalt mixtures in both tensile and compressive loadings. The importance of this fact lies in many developments from this discovery, e.g. compressive monotonic loading of cylindrical test samples permits a direct determination of the Paris' Law coefficient and exponent. In all cases, measured material properties are presented as they vary with mixture composition and with conditioning such as moisture and ageing, both in the lab and in the field. The measurements of these properties are made simply, quickly and accurately by the use of mechanics so that an entire characterisation of the properties of an asphalt mixture in tension and compression can be completed in the space of one day. The net effect is to reduce the efforts expended in the lab and the systematic error due to the assumptions made by the existing models and simultaneously to increase the efficiency and cost-effectiveness of materials testing and raise the reliability of the design of mixtures, pavement structures and specifications and the prediction of the life cycles in as-built pavements.

Simulation of indirect tension test of asphalt mixtures based on cohesive zone model

Cohesive Cracking Simulation of Asphalt Mixture with Reflective Crack Through Xfem

Characteristics of Damaged Asphalt Mixtures in Tension and Compression

Three-Dimensional Discrete Element Modelling Of Influence Factors Of Indirect Tensile Strength Of Asphalt Mixtures

Crack Initiation in Asphalt Mixtures under External Compressive Loads

Mechanistic Modeling of Fatigue Crack Growth in Asphalt Fine Aggregate Matrix under Torsional Shear Cyclic Load

Characteristics of Undamaged Asphalt Mixtures in Tension and Compression

Numerical Simulation of Effect of Horizontal Aggregate Distribution in Asphalt Mixtures on Splitting Test

Characterization of Asphalt Mixtures Using Controlled-Strain Repeated Direct Tension Test

Comparative Study of 2D and 3D Micromechanical Discrete Element Modeling of Indirect Tensile Tests for Asphalt Mixtures

Aggregate Distribution Influence On The Indirect Tensile Test Of Asphalt Mixtures Using The Discrete Element Method

Cohesive Cracking Simulation of Concrete Using Effective Modulus

Evaluation of Complex Poisson’s Ratio of Aged Asphalt Field Cores Using Direct Tension Test and Finite Element Simulation

A Calibrated Mechanics-Based Model for Top-Down Cracking of Asphalt Pavements

Comparative Modelling of Indirect Tensile Strength of Asphalt Mixtures with and Without Considering Air Void Characteristics

Study On Dynamic Response Characteristics Of Saturated Asphalt Pavement Under Multi-Field Coupling

Mesoscopic numerical test of crushing process of concrete under uniaxial compression

Enhanced Model for Thermally Induced Transverse Cracking of Asphalt Pavements

Numerical Simulation of an Indirect Tensile Test for Asphalt Mixtures Using Discrete Element Method Software

Numerical Simulation of Crack Propagation in Flexible Asphalt Pavements Based on Cohesive Zone Model Developed from Asphalt Mixtures

Simulation of Effect of Horizontal Aggregate Distribution on Indirect Tensile Test of Asphalt Mixtures Using Discrete Element Method