Abstract:High-gain materials and high-quality structures are the two main conditions that determine the amplification performance of optical waveguides. However, it has been hard to balance each other, to date. In this work, we demonstrate breakthroughs in both glass optical gain and optical waveguide structures. We propose a secondary melting dehydration technique that prepares high-quality Er3+-Yb3+ co-doped phosphate glass with low absorption loss. Additionally, we propose a femtosecond laser direct-writing technique that allows controlling the cross section, size, and mode field of waveguides written in glass with high accuracy, leveraging submicron-resolution multi-scan direct-writing optical waveguide technology, which is beneficial for reducing insertion loss. As a proof of concept demonstration, we designed and fabricated two kinds of waveguides, namely, LP01- and LP11-mode waveguides in the Er3+-Yb3+ co-doped phosphate glass, enabling insertion loss as low as 0.9 dB for a waveguide length of 2 mm. Remarkably, we successfully achieved an optical amplification for both the waveguides with a net gain of >7 dB and a net-gain coefficient of >3.5 dB/mm, which is approximately one order of magnitude larger than that in the Er3+-Yb3+ co-doped phosphate glass fabricated by the traditional melt-quenching method. This will open new avenues toward the development of integrated photonic chips. (c) 2023 Optica Publishing Group

Broadband Phosphate Glass Waveguide Amplifier with Long-period Grating

Device for concatenation of phase-shifted long-period grating and its application as gain-flattening fiber filter

Toward a 10 Db Net-Gain Waveguide Amplifier in an Er3+-Yb3+ Co-Doped Phosphate Glass

Toward a10 dB net-gain waveguide amplifier in an Er3+-Yb3+ co-doped phosphate glass

Gain and noise characteristics of phosphate glass Er^3+ – Yb^3+ co-doped waveguide amplifiers

High-efficiency cladding-pumped Er/Yb co-doped alumino-phosphosilicate fiber for an extended L-band amplification

Efficient Fibre Amplifiers Based on A Highly Er3+/Yb3+ Codoped Phosphate Glass-Fibre

Gain and noise characteristics of phosphate glass \hbox {Er}^{3+}–\hbox {Yb}^{3+} co-doped waveguide amplifiers

Broadband WDM Filter Based on an Improved Long-Period Grating Pair

Stitched Long-Period Fiber Gratings for Gain-Flattening of Broadband Edfas

High-order mode waveguide amplifier with high mode extinction ratio written in an Er3+-doped phosphate glass

Er3+/Yb3+ Co-Doped Waveguide Amplifier and Lossless Power Splitter Fabricated by A Two-Step Ion Exchange on A Commercial Phosphate Glass

Gain and noise characteristics of phosphate glass $$\hbox {Er}^{3+}$$–$$\hbox {Yb}^{3+}$$Yb3+ co-doped waveguide amplifiers

Improving extended L-band fiber amplifiers using Er 3+ : Y 3+ co-doped silicate with optimized alumino-phospho-silicate glass matrix

An All-Fibre Dynamic Gain Equalizer Based on a Novel Long-Period Fibre Grating Written by High-Frequency CO2 Laser Pulses

Wideband (13.7 THz) Gain-Flattened Yb-Doped Fiber Amplifier for Telecommunication Applications

Theoretical and Experimental Investigation on Erbium-Doped Fiber Amplifiers with Long-Period Fiber Grating Filters

Broadband Filter Using Cladding Profile Linearly Tapered Long-Period Waveguide Grating

Optimization and Fabrication of Stitched Long-Period Gratings for Gain Flattening of Ultrawide-Band Edfas

Formulized Analytical Technique for Gain Characteristics of Phosphate Glass Er3+/Yb3+ Co-Doped Waveguide Amplifiers

A Low-Fabrication-Temperature Erbium-Based Waveguide Amplifier