Abstract:The conventional Euler-Bernoulli beam element of the absolute nodal coordinate formulation (ANCF) yields incorrect axial force due to the existence of the first-order approximate function of the centerline and over-constraint equations. This work aims to improve the axial force accuracy of the element by using the second-order centerline approximate function and precise constraint equations. The second-order function includes the quintic Hermite shape function and the vector of nodal coordinates containing zeroth to second-order derivatives of position. The elastic force vector of the element and its tangent stiffness were then formulated based on the decoupled elastic line method. The exact kinematic requirements of three types of constraint points were fully clarified. On this basis, the corresponding concise constraint equations, constraint Jacobian and Hessian matrices were rigorously derived in the context of ANCF, where G2 continuity was demonstrated to be satisfied at the node acted by an inclined concentrated force, the relative rotation constraint of the rigid joint was described using the dot product of the gradients on both sides of the joint, and the fixing gradient direction at the partially-clamped end was expressed by using the zero cross product of the end gradients in the initial and deformed configurations. Large deformation problems of typical beams under fixed and follower loads were solved using five types of elements, where the results of the ABAQUS B22 elements were taken as a reference for validation. It is found that when using the first- and second-order beam elements having over-constraint equations of the three types of constraint points, obvious axial force error occurs near the corresponding constraint points. In comparison, a few second-order elements containing the derived constraint equations output correct axial force consistent with ABAQUS. However, a large number of the first-order elements containing the correct constraint equations still yield inaccurate axial force in certain beam regions.

Rigid Body Test and Recovery of Nodal Forces for Beam Element in Updated Lagrangian Formulation

A Co-Rotational Updated Lagrangian Formulation for a 2D Beam Element with Consideration of the Deformed Curvature

A Ductility-Centred Analytical Model for Axially Restrained Double-Span Steel Beam Systems Subjected to Sudden Columns Loss

A COROTATIONAL UPDATED LAGRANGIAN FORMULATION FOR GEOMETRICALLY NONLINEAR ANALYSIS OF 2D FRAMES

Modified Solution Strategy Of Framed Structures For Geometrically Nonlinear Analysis

Lateral Buckling of Web-Tapered I-beams: A New Theory

WARPING TRANSFER THROUGH JOINTS OF RHS COLUMN AND I-BEAM

A FIBER BEAM ELEMENT FOR THE FINITE PARTICLE METHOD CONSIDERING SHEAR AND TORSION DEFORMATON

BUCKLING OF TIMOSHENKO COLUMNS WITH LINEARLY VARIED RIGIDITIES AND AXIAL FORCES

A RESTUDY ON STABILITY OF STEEL BEAMS:INTERNATIONAL TESTS AND THEORETICAL ANALYSES(Ⅱ)

A finite-volume method for large deflection wind-excited response analysis of suspended cables

Shear Lag Including Axial Balance of Box Beams by Finite Segment Model

A higher order formulation for geometrically nonlinear space beam element

A New Higher-Order Euler-Bernoulli Beam Element of Absolute Nodal Coordinate Formulation

Fully Conforming Plane Beam Element for Large Deformation Analysis

A Refined Finite Element Formulation for Flexural and Torsional Buckling of Beam–columns with Finite Rotations

Investigation of the Stability of Axially Moving Beams With Discrete Masses

Comparison of finite element methods for dynamic analysis about rotating flexible beam

Improvement on the axial force accuracy of the ANCF Euler-Bernoulli beam element with the second-order approximate function of the centerline and precise constraint equations

A Mixed Co‐rotational Formulation of 2D Beam Element Using Vectorial Rotational Variables

Advanced Co-Rotational Procedure for Large Displacement Analysis of 2D Beam Element Using Vectorial Rotational Variables