Abstract:The firing, radicals and intermediates in the combustion process of a port-injection hydrogen (H2)-assisted combustion direct-injection spark-ignition (DISI) methanol engine were numerically simulated. The engine with port-injection H2 plus direct-injection methanol was tested at 1800 rpm with intake manifold absolute pressure of 68 kPa. AVL-Fire coupling the detailed methanol chemical kinetics modeling with 21 components and 84 elementary reactions was used to simulate in this study. The model calculation results agreed well with the experiments, and the average error is less than 3% and can guarantee other outcomes. The simulation results show that high added H2 ratio (RH2) has higher turbulent kinetic energy in the region closer to the combustion chamber wall. When RH2 is greater than 6%, the formation time of fire core is obviously shortened and the average flame propagation velocity is significantly increased. Increasing RH2, the generation speed and the peak value of H, O and OH radicals increase, and higher concentration of radicals accelerates the diffusion of com-bustion from the hot flame zone. OH radical is a key reactant, which always plays a decisive role in the process of methanol oxidation. Effect of added H2 on methanol oxidation reaction is reflected in accelerating the initial stage of combustion and ameliorating the intensity of reaction. The mass fractions of HCHO, HCO and CO, as the main intermediate products, all show a trend of increasing first and then decreasing with the crank angle (CA), and their peak values indicate the phase of the most violent reaction. The peak values of HCHO and HCO are all near the top dead center (TDC), which is consistent with the trend of H and OH radicals generation rate. The relationship between consumption rate of methanol and CA shows that the consumption rate of methanol at RH2 = 9% is the earliest and steepest, and most of methanol has been consumed by reaction before TDC. Added H2 accelerates the fire propagation, H2 dominates the process of radical formation and methanol chain reaction, the flame spread period is shortened rapidly, and the effect of added H2 to promote combustion is obvious.

Simulation of combustion characteristics of HCCI methanol-fueled engine

Comparison of Kinetic Mechanisms for Numerical Simulation of Methanol Combustion in DICI Heavy-Duty Engine

Combustion characteristics and performance of a methanol fueled homogenous charge compression ignition (HCCI) engine

Study on the Methanol/n-Heptane Duel Fuel Homogeneous Charge Compression Lgnition Combustion

Multidimensional Numerical Simulation on Dimethyl Ether/Methanol Dual-Fuel Homogeneous Charge Compression Ignition (HCCI) Engine Combustion and Emission Processes

Study on HCCI of Methanol by Rapid Compression Machine

Effect of EGR on combustion and emission of methanol HCCI engine

Experimental study on HCCI combustion of dimethyl ether(DME)/methanol dual fuel

Numerical Simulation of Homogeneous Charge Compression Ignition Combustion Using A Multi-Dimensional Model

Effects of Injection Parameters and EHN Mixing on the Combustion Characteristics of Fueling Pure Methanol in a Compression Ignition Engine

Simulation Study on Ethanol HCCI Engine Operating Region

Experimental Study On Homogeneous Charge Compression Ignition Operation By Burning Dimethyl Ether And Methanol

Numerical Simulation on HCCI Combustion of Reformed Methanol Gas Engine

Analysis of combustion characteristics and boundary condition effects on HCCI engine fueled with ethanol/diesel blends

Ignition and combustion inhibition of n-heptane homogenous charge compression ignition (HCCI) combustion by methanol additive

Experimental And Numerical Study On Auto-Ignition And Combustion Of Homogeneous Charge Compression Ignition Fueled With Dimethylether

Numerical Study on the Effects of CO2 and H2 on Combustion in a Dimethyl Ether HCCI Engine

Study on the Controlling Strategies of Homogeneous Charge Compression Ignition Combustion with Fuel of Dimethyl Ether and Methanol

Numerical Simulation of Chemical Kinetics Mechanism in HCCI Combustion Fueled with Dimethyl Ether

Numerical Study of the Firing, Radicals and Intermediates in the Combustion Process of a H2-assisted Combustion DISI Methanol Engine

Effects of the Initial Flame Kernel Radius and EGR Rate on the Performance, Combustion and Emission of High-Compression Spark-Ignition Methanol Engine